LDraw.org Wiki - User contributions [en]

Getting Started - Linux

2014-06-25T10:01:00Z

Arezey: /* Updating your parts list */

This article details installation procedures for the LDraw parts library and various applications for it.

The information has been validated and tested using Ubuntu 14.04 LTS. Any related information referencing Red Hat distributions such as Fedora have also been validated throughout regular use of the Fedora 20 OS release.

==Download and Install the LDraw parts Library==

Basic setup (applies to any Linux distribution or operating system - Recommended approach):

*Download the latest <code>complete.zip</code> from [http://www.ldraw.org/downloads-2/downloads.html LDraw.org download page].
*Extract the <code>complete.zip</code> archive in the directory of your choice - your home directory is recommended (<code>~/ldraw/</code>) to avoid any file permission conflict or having to tamper with your system as 'root'.

=== rpm package ===
Note: This method will unpack the parts library into <tt>/usr/share/ldraw</tt>, which is only modifiable via root access.

* Download the latest (2013-02) version of the parts library packaged by Eli Carter from the [https://retracile.net/blog/2014/05/31/17.00 Retractile blog page].
* Install <code>ldraw_parts-creativecommons-201302-ec4.noarch.rpm</code> using your preferred package manager.

== Install an editor ==

=== LeoCAD ===

LeoCAD is readily available for install for both Debian and Red Hat based distributions. You can install the editor by looking for and installing the <tt>leocad</tt> package using your distribution's package manager.
* Install LeoCAD:
** deb: <code>$ sudo apt-get install leocad</code>
** rpm: <code>$ sudo yum-install leocad</code>
* Run LeoCAD and point it to the LDraw parts library:
** Go to View > Preferences... and set your library directory by either typing it in the field or browsing to it via '...'. Make sure to select the topmost directory (normally 'ldraw') that contains the 'parts' directory.

LeoCAD can use either a zip file or a regular folder as its parts library directory. You can start Leocad with a different library setup using: <tt>$ leocad -l <library directory path></tt>
LeoCAD also supports setting the library path as a system environment variable like so: <tt>set LEOCAD_LIB=<library directory path></tt>

=== LDCad ===

* Go to [http://www.melkert.net/LDCad/download LDCad's download page]
* Select and download the latest generic archive of the LDCad editor.
* Extract the archive in the directory of your choice - your home directory is recommended to avoid any file permission conflict or having to tamper with your system as 'root'.
* Run LDCad, follow the prompts and point it to the LDraw parts library. Make sure to select the topmost directory (normally 'ldraw') that contains the 'parts' directory.

LDCad uses so GTK libraries so make sure you have installed the required GTK packages.

=== MLCAD via Wine ===
* Install [http://www.winehq.org/ Wine] via your distribution's package manager or application repository.
** deb: <code>$ sudo apt-get install wine</code>
** rpm: <code>$ sudo yum-install wine</code>
* Download the [http://mlcad.lm-software.com/MLCad_V3.40.zip MLCad archive] and extract it.
* Run MLCad by selecting <code>MLCAD.exe</code> and follow the usual prompts (LDraw parts library directory location and file type registration setup)
* Select Wine as the default method to open an executable on your system and proceed with the previously mentioned steps.

MLCAD runs exceptionally well with Platinum status on the Wine's [http://appdb.winehq.org/objectManager.php?sClass=application&iId=1354 AppDB] scale.

=== LDGLite ===

LDGLite is only available as a standalone 64bit binary for Linux.
* Download the [http://ldglite.sourceforge.net/ldglite1_2_3beta64bit.gz LDGLite binary archive]
* Extract the archive in the directory of your choice - your home directory is recommended to avoid any file permission conflict or having to tamper with your system as 'root'.
* Run LDGLite, right click on its background to get started.

This specific standalone requires libraries such as the dri accelerated opengl libraries, glut, glu, libpng and zlib to be installed.

== Related applications ==
=== LDView ===
LDView is a real-time 3D viewer for displaying LDraw models using hardware-accelerated 3D graphics. It is an essential tool in the creation of a model as it can be used to view and debug, in real-time and with full 3D graphics capacity, the model currently being edited. It can also generate snapshots of the displayed content or of specific selected views of the given model. LDView is native to the Linux platform and is readily available for install for both Debian and Red Hat based distributions.

* Download the latest binary package from LDView's [http://ldview.sourceforge.net/Downloads.html downloads page].
* Install LDView by using distribution's package manager.

On Debian-based systems, your system may complain about either missing packages or unresolved dependencies. You may resolve these by forcing an install fix: <tt>sudo apt-get -f install</code>'''</tt>

For rpm-systems, there is a [http://download.opensuse.org/repositories/home:/pbartfai/ LDView repository] for binaries, from which you can get the latest LDView version, provided you add the yum repository information as follows:'''

sudo cat > /etc/yum.repos.d/ldview.repo << FILE
[ldview]
name=LDView Repository
baseurl=http://download.opensuse.org/repositories/home:/pbartfai/Fedora_$(rpm -E %fedora)/
gpgkey=http://download.opensuse.org/repositories/home:/pbartfai/Fedora_$(rpm -E %fedora)/repodata/repomd.xml.key
enabled=1
gpgcheck=0
FILE

The variable <code>"$(rpm -E %fedora)"</code> refers to rpm's way (on the Fedora distribution) of finding the current version and attributing the proper number to the URL.'''

The OpenSUSE build server automatically generates the configurations for upcoming or newer versions of any supported Red Hat distribution, ONLY when those distribution versions are stable and public.

=== LPub ===

LPub is an LDraw building instruction editor. It enables the creation of highly detailed, professional looking instructions. It uses external rendering applications to generate the model's step thumbnails to be included in the document, with both LDView and LDGLite supported.

The port was generated by Eli Carter in 2009 and has been updated to enable the compilation and packaging of the latest revision of the software for Linux based distributions.

For Debian-based distributions:
* Download the latest installer package from Nathanel Titane's latest [https://github.com/nathaneltitane/lpub/tree/master/2014-06-03 LPub Github repository].
* Install <code>lpub.deb</code> using your preferred package manager or command package management tool (apt, dpkg).
* Your system may complain about either missing packages or unresolved dependencies. You may resolve these by forcing an install fix: <code>sudo apt-get -f install</code>''' 

For Red Hat-based distributions:
* Download the latest installer package from Eli Carter's [https://retracile.net/blog/2014/05/31/17.20 blog page].
* Install <code>lpub4-4.0.0.14-20140514.ec3.x86_64.rpm</code> using your preferred package manager or command package management tool (yum, rpm).

=== Buf3D (Android) ===

Buf3D is an application aimed at bringing the most actual developments of OpenGL technology for model viewing purposes to the Android mobile platform. Amongst many of its supported file formats and model viewing features it includes the ability to view LDraw models. It will prompt you to make use (online) or download of the official LDraw parts library.

You can find and install this application via the [https://play.google.com/store/apps/details?id=com.cimplus.buf3d Google Play Store]

== Updating your parts list ==

If, the parts directory has been altered (such as by upgrading), the parts.lst file needs to be updated:
* The stock mklist.exe can be run with Wine
* A native Linux alternative called 'make-list' can be found on github: https://github.com/nathaneltitane/scripts

== Notes ==
* The LDraw parts directory can be moved to another location, such as a hidden folder or a separate partition or a different part of your system to prevent any such unwanted changes. The library is portable and any editor, viewer, renderer or utility can be directed to its location.
* A new package called <tt>ldraw-parts</tt> for Debian based systems is being created and submitted for approval for the Debian project: https://ftp-master.debian.org/new/ldraw-parts_1302+ds-1.html
* Konstruktor is an in-development CAD that aims to feature a fully modular panel interface as well as full HD POV-Ray rendering capabilities of the model being edited. You may visit the temporary webpage [http://konstruktor.influx.kr/ here] or its [https://github.com/segfault87/Konstruktor GitHub repository].

== Dive in ==

Learning how to use your new editor or understanding the LDraw file format may be a challenge, but with a little practice you will get the hang of it. Take a look at the tutorials [[:Category:Tutorials|on the wiki]] or [http://www.ldraw.org/article/58.html on the main website] for further help.

Forums are also a great way to discuss techniques, issues or features of editors or applications used to create or edit your LDraw model files. If you require any further help with any of this content, please visit the [http://forums.ldraw.org LDraw.org Forums], sign up, and ask a large group of users for help.

[[Category:Linux]]
[[Category:Tutorials]]

User:Arezey

2014-06-24T23:13:40Z

Arezey: Replaced content with "oranges are not purple"

oranges are not purple

Getting Started - Linux

2014-06-24T23:12:10Z

Arezey: major revision

This article details installation procedures for the LDraw parts library and various applications for it.

The information has been validated and tested using Ubuntu 14.04 LTS. Any related information referencing Red Hat distributions such as Fedora have also been validated throughout regular use of the Fedora 20 OS release.

==Download and Install the LDraw parts Library==

Basic setup (applies to any Linux distribution or operating system - Recommended approach):

*Download the latest <code>complete.zip</code> from [http://www.ldraw.org/downloads-2/downloads.html LDraw.org download page].
*Extract the <code>complete.zip</code> archive in the directory of your choice - your home directory is recommended (<code>~/ldraw/</code>) to avoid any file permission conflict or having to tamper with your system as 'root'.

=== rpm package ===
Note: This method will unpack the parts library into <tt>/usr/share/ldraw</tt>, which is only modifiable via root access.

* Download the latest (2013-02) version of the parts library packaged by Eli Carter from the [https://retracile.net/blog/2014/05/31/17.00 Retractile blog page].
* Install <code>ldraw_parts-creativecommons-201302-ec4.noarch.rpm</code> using your preferred package manager.

== Install an editor ==

=== LeoCAD ===

LeoCAD is readily available for install for both Debian and Red Hat based distributions. You can install the editor by looking for and installing the <tt>leocad</tt> package using your distribution's package manager.
* Install LeoCAD:
** deb: <code>$ sudo apt-get install leocad</code>
** rpm: <code>$ sudo yum-install leocad</code>
* Run LeoCAD and point it to the LDraw parts library:
** Go to View > Preferences... and set your library directory by either typing it in the field or browsing to it via '...'. Make sure to select the topmost directory (normally 'ldraw') that contains the 'parts' directory.

LeoCAD can use either a zip file or a regular folder as its parts library directory. You can start Leocad with a different library setup using: <tt>$ leocad -l <library directory path></tt>
LeoCAD also supports setting the library path as a system environment variable like so: <tt>set LEOCAD_LIB=<library directory path></tt>

=== LDCad ===

* Go to [http://www.melkert.net/LDCad/download LDCad's download page]
* Select and download the latest generic archive of the LDCad editor.
* Extract the archive in the directory of your choice - your home directory is recommended to avoid any file permission conflict or having to tamper with your system as 'root'.
* Run LDCad, follow the prompts and point it to the LDraw parts library. Make sure to select the topmost directory (normally 'ldraw') that contains the 'parts' directory.

LDCad uses so GTK libraries so make sure you have installed the required GTK packages.

=== MLCAD via Wine ===
* Install [http://www.winehq.org/ Wine] via your distribution's package manager or application repository.
** deb: <code>$ sudo apt-get install wine</code>
** rpm: <code>$ sudo yum-install wine</code>
* Download the [http://mlcad.lm-software.com/MLCad_V3.40.zip MLCad archive] and extract it.
* Run MLCad by selecting <code>MLCAD.exe</code> and follow the usual prompts (LDraw parts library directory location and file type registration setup)
* Select Wine as the default method to open an executable on your system and proceed with the previously mentioned steps.

MLCAD runs exceptionally well with Platinum status on the Wine's [http://appdb.winehq.org/objectManager.php?sClass=application&iId=1354 AppDB] scale.

=== LDGLite ===

LDGLite is only available as a standalone 64bit binary for Linux.
* Download the [http://ldglite.sourceforge.net/ldglite1_2_3beta64bit.gz LDGLite binary archive]
* Extract the archive in the directory of your choice - your home directory is recommended to avoid any file permission conflict or having to tamper with your system as 'root'.
* Run LDGLite, right click on its background to get started.

This specific standalone requires libraries such as the dri accelerated opengl libraries, glut, glu, libpng and zlib to be installed.

== Related applications ==
=== LDView ===
LDView is a real-time 3D viewer for displaying LDraw models using hardware-accelerated 3D graphics. It is an essential tool in the creation of a model as it can be used to view and debug, in real-time and with full 3D graphics capacity, the model currently being edited. It can also generate snapshots of the displayed content or of specific selected views of the given model. LDView is native to the Linux platform and is readily available for install for both Debian and Red Hat based distributions.

* Download the latest binary package from LDView's [http://ldview.sourceforge.net/Downloads.html downloads page].
* Install LDView by using distribution's package manager.

On Debian-based systems, your system may complain about either missing packages or unresolved dependencies. You may resolve these by forcing an install fix: <tt>sudo apt-get -f install</code>'''</tt>

For rpm-systems, there is a [http://download.opensuse.org/repositories/home:/pbartfai/ LDView repository] for binaries, from which you can get the latest LDView version, provided you add the yum repository information as follows:'''

sudo cat > /etc/yum.repos.d/ldview.repo << FILE
[ldview]
name=LDView Repository
baseurl=http://download.opensuse.org/repositories/home:/pbartfai/Fedora_$(rpm -E %fedora)/
gpgkey=http://download.opensuse.org/repositories/home:/pbartfai/Fedora_$(rpm -E %fedora)/repodata/repomd.xml.key
enabled=1
gpgcheck=0
FILE

The variable <code>"$(rpm -E %fedora)"</code> refers to rpm's way (on the Fedora distribution) of finding the current version and attributing the proper number to the URL.'''

The OpenSUSE build server automatically generates the configurations for upcoming or newer versions of any supported Red Hat distribution, ONLY when those distribution versions are stable and public.

=== LPub ===

LPub is an LDraw building instruction editor. It enables the creation of highly detailed, professional looking instructions. It uses external rendering applications to generate the model's step thumbnails to be included in the document, with both LDView and LDGLite supported.

The port was generated by Eli Carter in 2009 and has been updated to enable the compilation and packaging of the latest revision of the software for Linux based distributions.

For Debian-based distributions:
* Download the latest installer package from Nathanel Titane's latest [https://github.com/nathaneltitane/lpub/tree/master/2014-06-03 LPub Github repository].
* Install <code>lpub.deb</code> using your preferred package manager or command package management tool (apt, dpkg).
* Your system may complain about either missing packages or unresolved dependencies. You may resolve these by forcing an install fix: <code>sudo apt-get -f install</code>''' 

For Red Hat-based distributions:
* Download the latest installer package from Eli Carter's [https://retracile.net/blog/2014/05/31/17.20 blog page].
* Install <code>lpub4-4.0.0.14-20140514.ec3.x86_64.rpm</code> using your preferred package manager or command package management tool (yum, rpm).

=== Buf3D (Android) ===

Buf3D is an application aimed at bringing the most actual developments of OpenGL technology for model viewing purposes to the Android mobile platform. Amongst many of its supported file formats and model viewing features it includes the ability to view LDraw models. It will prompt you to make use (online) or download of the official LDraw parts library.

You can find and install this application via the [https://play.google.com/store/apps/details?id=com.cimplus.buf3d Google Play Store]

=== Updating your parts list ===

If, the parts directory has been altered (such as by upgrading), the parts.lst file needs to be updated:
* The stock mklist.exe can be run with Wine
* A native Linux alternative called 'make-list' can be found on github: https://github.com/nathaneltitane/scripts

== Notes ==
* The LDraw parts directory can be moved to another location, such as a hidden folder or a separate partition or a different part of your system to prevent any such unwanted changes. The library is portable and any editor, viewer, renderer or utility can be directed to its location.
* A new package called <tt>ldraw-parts</tt> for Debian based systems is being created and submitted for approval for the Debian project: https://ftp-master.debian.org/new/ldraw-parts_1302+ds-1.html
* Konstruktor is an in-development CAD that aims to feature a fully modular panel interface as well as full HD POV-Ray rendering capabilities of the model being edited. You may visit the temporary webpage [http://konstruktor.influx.kr/ here] or its [https://github.com/segfault87/Konstruktor GitHub repository].

== Dive in ==

Learning how to use your new editor or understanding the LDraw file format may be a challenge, but with a little practice you will get the hang of it. Take a look at the tutorials [[:Category:Tutorials|on the wiki]] or [http://www.ldraw.org/article/58.html on the main website] for further help.

Forums are also a great way to discuss techniques, issues or features of editors or applications used to create or edit your LDraw model files. If you require any further help with any of this content, please visit the [http://forums.ldraw.org LDraw.org Forums], sign up, and ask a large group of users for help.

[[Category:Linux]]
[[Category:Tutorials]]

T-Junction

2013-07-13T18:31:57Z

Arezey: condense imaging

T-Junctions in LDraw parts can often lead to unavoidable rendering artifacts, so it's best to avoid them when possible.

By Travis Cobbs.

==Definition==

A T-junction is a spot where two polygons meet along the edge of another polygon, like so:

[[Image:T_Junction1.png]]

If these occur in a random location along a diagonal edge, it's often the case that the precise coordinates of the junction cannot be put into the DAT file. Many people would agree that that would be bad. However, when they occur at precise coordinates, it's tempting to say that there's nothing wrong with them, since there shouldn't be any round-off problems. Unfortunately, when you go to arbitrary 3D views, this turns out not to be the case.

It turns out that a 3D rendering engine can only guarantee that a closed polygon mesh is tight (no visible gaps) if the mesh does not contain any T-junctions. The reason for this is that once you start rotating things in 3D, the precise coordinates stop being precise.

The following illustrates this problem:

[[Image:T_Junction2.png]]

Notice the white dots. If you view the file in wireframe, you'll see that these dots occur along the seams between polygons. Please note that the actual coordinates of all the points in the file are fine (as far as I know; I haven't checked, but I believe Mike). The dots are there because from that point of view, the edges are diagonal, and diagonal edges require rounding. Essentially, the rounding cannot be guaranteed to be the same on the polygons along the edge if those polygons don't share common end-points on both ends.

[[Image:T_Junction3.png|right]] [[Image:T_Junction3a.png|right]]
This may be difficult to understand. Hopefully the following will illustrate the point:

These images were done in Microsoft Paint (then blown up by 800%), with two sets of lines that are designed to be right next to each other. The image on the left represents the T-Junction case. The one on the right represents the case without a T-junction. As you can see, there are gaps in the image on the left. This isn't quite the same as T-junctions in a part file, since the above sets of lines were drawn with 1 pixel difference. However, since 3D renderers are representing adjoining polygons with an infinitely thin edge between them, it actually works out to a very similar problem. (Note that the red line in the left image was actually drawn starting at the bottom-most green pixel, and the green line was then drawn with the same end-point.)

Additionally, T-Junctions prevent smooth shading algorithms (like the ones used in LDView) from working on curved geometry (like minifig faces). The reason that this is so is complicated, and not really important to understand. What is important to understand is that T-Junctions on '''any''' curved surface will prevent smoothing algorithms from working on that surface to visually removing the facets. In fact, they can cause very strange visual artifacts.

==Getting rid of T-junctions your LDraw part==

As far as I know, a T-junction in a triangle or quad can always be removed by the addition of one triangle. This can be tedious, but I don't know of any automated solution. Also, there are often better ways to get rid of T-junctions than adding a triangle. For example:

[[Image:T_Junction4.png]] [[Image:T_Junction5.png]] [[Image:T_Junction6.png]]

[[Image:T_Junction7.png|left]]
Notice that the bottom version is made up of 4 quads, while the middle version has 3 quads and 2 triangles. That makes the bottom version better, sort of. Most renderers will at some point divide all the quads into triangles, and both versions result in the same number of final triangles, so it's not necessarily as much better as it might look. (I mention this, because things get a whole lot more complicated as the shapes become more complex, and it's really not worth trying to figure out the configuration with the fewest number of lines in the LDraw file. The differences are just too minor for that to be worth it.)

So the most basic way to get rid of a T-junction is to add a new triangle inside an existing quad or triangle. One thing that you DON'T want to do is convert a triangle into a quad in order to avoid a T-junction. This won't actually work right.

In the example at the left, the correct thing to do is split the triangle into two separate triangles: A•B•D and B•C•D. If you create a quad A•B•C•D, the tracker might reject the part (degenerate quad), but even if it doesn't, it's bad. As I said above, the renderer will likely split the quad into two triangles. The thing is, there's no way to know how that split will go. So it could choose A•B•D and B•C•D, or it could choose A•B•C and A•C•D, which ends up being a triangle with a T-junction and a degenerate triangle (line). LDView will actually pull the D point out of the quad at load time and treat it as a triangle (and spit out a warning).

This all gets much more complicated when the T-junctions happen along the edges of primitives like disks. Sometimes it's not even possible to get rid of the T-junctions when using primitives, and at least with circular primitives, I think that it's better to use a circular primitive with a T-junction that can't be removed than it is to avoid the circular primitive in order to avoid the T-junction.

[[Category:Tutorials]]

Template:PersonPic

2013-07-13T12:28:24Z

Arezey:

{| style="text-align: left; width: 200px; float:right; background: #C3D7FA; border: solid 1px; border-radius: 8px"
|-
|colspan="2" style="text-align: center" |'''{{{Name}}}'''
|-
|colspan="2" style="text-align: center; font-size: 90%" |[{{{Username}}}]
|-
|style="text-align: right" |'''Age''':
|{{{Age}}}
|-
|style="text-align: right" |'''Country''':
|{{{Country}}}
|-
|style="text-align: right" |'''Role(s)''':
|{{{Roles}}}
|-
|colspan="2" align="center"| [[{{{ImageSource}}}|frameless]]
|-
|}

Template:Software

2013-04-21T01:11:39Z

Arezey: rounded corners

{| style="border: 1px solid black; border-radius: 4px; width: 300px; float:right; margin-left: 10px" cellspacing="0" cellpadding="2"
|-
| colspan="2" style="background-color: #4775A3; color: black; text-align:center; font-size: 16px" | '''{{PAGENAME}}'''
|-
| colspan="2" style="background-color: #4775A3; color: black; text-align:center; font-size: 16px" | [[File:{{{image}}}|48px]]
|-
| style="background-color: #4775A3; color: black" | '''Developer(s)'''
| style="background-color: #EEE; color: black; border-top: 1px solid black; border-left: 1px solid black; border-radius: 4px 0px 0px 0px" | {{{developer}}}
|-
| style="background-color: #4775A3; color: black" | '''Purpose'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{function}}}
|-
| style="background-color: #4775A3; color: black" | '''Current version'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{version}}}
|-
| style="background-color: #4775A3; color: black" | '''Platform(s)'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{platform}}}
|-
| style="background-color: #4775A3; color: black" | '''Website'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{website}}}
|-
|}<noinclude>

==Usage==
<pre>{{Software
|image=
|developer=
|function=
|version=
|platform=
|website=
}}</pre>
</noinclude>
<includeonly>[[Category:Software]]</includeonly>

Template:Software

2013-04-21T01:08:40Z

Arezey:

{| style="border: 1px solid black; width: 300px; float:right; margin-left: 10px" cellspacing="0" cellpadding="2"
|-
| colspan="2" style="background-color: #4775A3; color: black; text-align:center; font-size: 16px" | '''{{PAGENAME}}'''
|-
| colspan="2" style="background-color: #4775A3; color: black; text-align:center; font-size: 16px" | [[File:{{{image}}}|48px]]
|-
| style="background-color: #4775A3; color: black" | '''Developer(s)'''
| style="background-color: #EEE; color: black; border-top: 1px solid black; border-left: 1px solid black" | {{{developer}}}
|-
| style="background-color: #4775A3; color: black" | '''Purpose'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{function}}}
|-
| style="background-color: #4775A3; color: black" | '''Current version'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{version}}}
|-
| style="background-color: #4775A3; color: black" | '''Platform(s)'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{platform}}}
|-
| style="background-color: #4775A3; color: black" | '''Website'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{website}}}
|-
|}<noinclude>

==Usage==
<pre>{{Software
|image=
|developer=
|function=
|version=
|platform=
|website=
}}</pre>
</noinclude>
<includeonly>[[Category:Software]]</includeonly>

Template:Software

2013-04-21T01:06:35Z

Arezey:

{| style="border: 1px solid black; width: 300px; float:right; margin-left: 10px" cellspacing="0" cellpadding="2"
|-
| colspan="2" style="background-color: #4775A3; color: black; text-align:center; font-size: 16px" | '''{{PAGENAME}}'''
|-
| colspan="2" style="background-color: #4775A3; color: black; text-align:center; font-size: 16px" | [[File:{{{image}}}.png]]
|-
| style="background-color: #4775A3; color: black" | '''Developer(s)'''
| style="background-color: #EEE; color: black; border-top: 1px solid black; border-left: 1px solid black" | {{{developer}}}
|-
| style="background-color: #4775A3; color: black" | '''Purpose'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{function}}}
|-
| style="background-color: #4775A3; color: black" | '''Current version'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{version}}}
|-
| style="background-color: #4775A3; color: black" | '''Platform(s)'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{platform}}}
|-
| style="background-color: #4775A3; color: black" | '''Website'''
| style="background-color: #EEE; color: black; border-left: 1px solid black" | {{{website}}}
|-
|}<noinclude>

==Usage==
<pre>{{Software
|image=
|developer=
|function=
|version=
|platform=
|website=
}}</pre>
</noinclude>
<includeonly>[[Category:Software]]</includeonly>

L(EGO)Draw New Parts Batch 4

2010-09-17T23:16:37Z

Arezey: /* 5xxxx */

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

===2xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=
|status=Official part 2010-02
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===3xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x168}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x100}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x98}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=Eldar
|notes=
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes={{Peeron|x175}} See 30138.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Is partnumber on Peeron wrong? {{Peeron|30113}}.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes={{Peeron|x371}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron. Similar design as {{Peeron2|6919}}, but with solid dish. New part?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=Eldar(in progress)
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=30289
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=Eldar(in progress)
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron. This is Glass for Window 30288. Official part [http://www.ldraw.org/library/official/parts/354.dat 354] needs to be renumberd.
|status=Awaiting cleanse
|bgcolor=DAA
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron "Scala Hair Dryer" {{Peeron|x694}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=This file contains data for four different Scala parts. {{Peeron|x690}} "Scala Clip-On Accessories (Complete)"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes={{Peeron|x12}} "Scala Finial"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron Is this part same as Peeron [http://www.peeron.com/inv/parts/688 688] or Bricklink [http://www.bricklink.com/catalogItem.asp?P=x69 x69]? Official file [http://www.ldraw.org/library/official/parts/688.dat 688] is 5% shorter and 5% wider.
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===4xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron. This is official part [http://www.ldraw.org/library/official/parts/503.dat 503] Official file needs to be renumberd.
|status=Awaiting cleanse
|bgcolor=DAA
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=westrate
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=The header of this file is "SHIP'S BOTTOM 10X32, YELLOW" The same misstake is present in LDD. This is not Technic Flipper 32008, see that number above.
|status=Awaiting cleanse
|bgcolor=DAA
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===5xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_54090.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=Philo
|notes=Peeron 54094c01
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

Template:Peeron2

2010-09-13T09:32:00Z

Arezey:

[http://peeron.com/inv/parts/{{{1}}} {{{1}}}]

L(EGO)Draw New Parts Batch 4

2010-09-13T09:31:36Z

Arezey: /* 3xxxx */

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

===2xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===3xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x168}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x100}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x98}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes={{Peeron|x175}} See 30138.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Is partnumber on Peeron wrong? {{Peeron|30113}}.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes={{Peeron|x371}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron. Similar design as {{Peeron2|6919}}, but with solid dish. New part?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron "Scala Hair Dryer" {{Peeron|x694}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=This file contains data for four different Scala parts. {{Peeron|x690}} "Scala Clip-On Accessories (Complete)"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes={{Peeron|x12}} "Scala Finial"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron Is this part same as Peeron [http://www.peeron.com/inv/parts/688 688] or Bricklink [http://www.bricklink.com/catalogItem.asp?P=x69 x69]? Official file [http://www.ldraw.org/library/official/parts/688.dat 688] is 5% shorter and 5% wider.
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===4xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron. This is official part [http://www.ldraw.org/library/official/parts/503.dat 503] Official file needs to be renumberd.
|status=Awaiting cleanse
|bgcolor=DAA
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|32008}} ?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===5xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_54090.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 4

2010-09-13T09:22:35Z

Arezey:

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

===2xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===3xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x168}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x100}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x98}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes={{Peeron|x175}} See 30138.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Is partnumber on Peeron wrong? Known {{Peeron|30113}}.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron {{Peeron|x371}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron. Similar design as {{Peeron|6919}}, but with solid dish. New part?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron "Scala Hair Dryer" {{Peeron|x694}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=This file contains data for four different Scala parts. {{Peeron|x690}} "Scala Clip-On Accessories (Complete)"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes={{Peeron|x12}} "Scala Finial"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron Is this part same as Peeron [http://www.peeron.com/inv/parts/688 688] or Bricklink [http://www.bricklink.com/catalogItem.asp?P=x69 x69]? Official file [http://www.ldraw.org/library/official/parts/688.dat 688] is 5% shorter and 5% wider.
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===4xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron. This is official part [http://www.ldraw.org/library/official/parts/503.dat 503] Official file needs to be renumberd.
|status=Awaiting cleanse
|bgcolor=DAA
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|32008}} ?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

===5xxxx===
{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-
{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_54090.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 4

2010-09-12T10:02:36Z

Arezey: ...

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x168}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x100}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x98}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes={{Peeron|x175}} See 30138.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Is partnumber on Peeron wrong? Known {{Peeron|30113}}.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron {{Peeron|x371}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron. Similar design as {{Peeron|6919}}, but with solid dish. New part?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30408
|cleaner=anathema
|notes={{peeron|x130}}
|status=In progress
|bgcolor=FF8
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=32476
|cleaner=arezey
|notes={{peeron|x240}}
|status=Cleanse in progress
|bgcolor=FF8
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron "Scala Hair Dryer" {{Peeron|x694}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=This file contains data for four different Scala parts. {{Peeron|x690}} "Scala Clip-On Accessories (Complete)"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes={{Peeron|x12}} "Scala Finial"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_54090.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 4

2010-09-12T10:01:48Z

Arezey:

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x168}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x100}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron. {{Peeron|x98}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes={{Peeron|x175}} See 30138.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Is partnumber on Peeron wrong? Known {{Peeron|30113}}.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron {{Peeron|x371}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron. Similar design as {{Peeron|6919}}, but with solid dish. New part?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30408
|cleaner=anathema
|notes={{peeron|x130}}
|status=In progress
|bgcolor=FF8
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=32476
|cleaner=arezey
|notes={{peeron|x240}}
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron "Scala Hair Dryer" {{Peeron|x694}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=This file contains data for four different Scala parts. {{Peeron|x690}} "Scala Clip-On Accessories (Complete)"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes={{Peeron|x12}} "Scala Finial"
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_54090.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 4

2010-09-11T11:07:02Z

Arezey:

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes={{peeron|x206c01}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30408
|cleaner=anathema
|notes={{peeron|x130}}
|status=In progress
|bgcolor=FF8
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=32476
|cleaner=arezey
|notes={{peeron|x240}}
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 4

2010-09-10T23:13:23Z

Arezey:

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30408
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=32476
|cleaner=arezey
|notes={{peeron|x240}}
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 4

2010-09-10T23:11:17Z

Arezey:

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2010-09-10'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30408
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=32476
|cleaner=arezey
|notes={{peeron|x240}}
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

L(EGO)Draw New Parts Batch 4

2010-09-10T23:07:56Z

Arezey:

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2009-10-13'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:

*change the bgcolor= field from DDD (gray) to FF8 (yellow)
*type your username into the cleaner= field
*change status= field into Cleanse in progress

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

'''NB: Parts noted as "Part number unknown to Peeron" ''might'' have been modeled under an unknown part number. These parts' possible models need to be investigated!'''

{| class="wikitable sortable" cellpadding="3" cellspacing="0" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2038
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=23065
|cleaner=
|notes=
|status={{pt|parts/23065.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2497
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2498
|cleaner=
|notes=Status under investigation
|status=Unknown
|bgcolor=AAA
}}

{{ChartItem
|number=2515
|cleaner=
|notes=
|status={{pt|parts/2515.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=2815
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30018
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30032
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30038
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30085
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30084
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30100
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30110
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30113
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30131
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30138
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30202
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30208
|cleaner=
|notes=
|status={{pt|parts/30208.dat|Hold-voted}} for material issues. LUT may very well be of use here!
|bgcolor=DDD
}}

{{ChartItem
|number=30210
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30263
|cleaner=
|notes={{pt|parts/30263.dat|On PT}}, but author has not affirmed the CA. LUT cleanse would replace the PT version.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30289
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30291
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30294
|cleaner=
|notes=Counterpart 30293.dat {{pt|parts/30293.dat|at PT}}
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30321
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30408
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30410
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30456
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30459
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30460
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30478
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30491
|cleaner=
|notes=Counterpart to 30488.dat. The composite also has a spring in between the parts!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32008
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32084
|cleaner=
|notes=
|status={{pt|parts/32084.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=32475
|cleaner=
|notes=Part {{pt|parts/32475.dat|on PT}} but has (Needs Work) identifier - perhaps the file can be of use here?
|status=Unknown
|bgcolor=DDD
}}

{{ChartItem
|number=32476
|cleaner=arezey
|notes={{peeron|x240}}
|status=Awaiting cleanse
|bgcolor=FF8
}}

{{ChartItem
|number=33007
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33025
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33048
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33052
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33176
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33207
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33279
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=3778
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4003
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40387
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40389
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40390
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40397
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4094
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41070
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4156
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42013
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43750
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44358
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=44359
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45708
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=46203
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47755
|cleaner=
|notes=
|status={{pt|parts/47755.dat|Hold-voted}}
|bgcolor=DAA
}}

{{ChartItem
|number=47992
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48294
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50687
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=50986
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53452
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53588
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=53983
|cleaner=
|notes=Part {{pt|parts/53983.dat|on PT}} but lacks outer fans and is tagged as (Needs Work). LUT part may be of use here!
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=53992
|cleaner=
|notes=Part probably exists in some other form - investigation needed
|status=Unknown
|bgcolor=888
}}

{{ChartItem
|number=54090
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54094
|cleaner=
|notes=Part unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54125
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=54655
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=888
}}

{{ChartItem
|number=54809
|cleaner=
|notes=Investigation needed - part appears odd. Probably a part of a composite. NXT-related?
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55668
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=55676
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56619
|cleaner=
|notes=Part number unknown to Peeron
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=56897
|cleaner=
|notes={{pt|parts/56897.dat|On PT}} but the version there appears to be the part 56898. Checking needed here!
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57051
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57274
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57557
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57558
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57563
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57564
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=57568
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

Template:Peeron

2010-09-10T23:07:49Z

Arezey:

[http://peeron.com/inv/parts/{{{1}}} On Peeron as {{{1}}}]

Template:Pt

2010-09-10T21:28:23Z

Arezey:

[http://ldraw.org/cgi-bin/ptdetail.cgi?f={{{1}}} {{{2}}}]

L(EGO)Draw New Parts Batch 1

2010-05-06T23:14:55Z

Arezey:

This chart lists all new and uncleaned parts from the first LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2007-08-25'''.

When picking a part to work on, please edit the page, scroll down to the part entry's FSBChartItem and:
* change bgcolor= field from ''DDD'' (=gray) to ''FF8'' (=yellow)
* type your username into the cleaner= field
* change status= field into ''Cleanse in progress''

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page, thank you.

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{FSBChartItem
|number=3278
|imagename=3278_G
|notes=Official part 70. Also present in [http://www.holly-wood.it/tmp/LEGODraw/m3278.dat Third Batch] and at [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/3278.dat Part Tracker]
|cleaner=
|status=Awaiting comparision.
|bgcolor=DDD
}}

{{FSBChartItem
|number=33129
|imagename=33129_G
|notes=Also present in [http://www.holly-wood.it/tmp/LEGODraw/m33129.dat Third Batch]
|cleaner=
|status=Awaiting cleanse.
|bgcolor=DDD
}}

{{FSBChartItem
|number=3496
|imagename=3496_G
|notes=Official part 69. Also present in [http://www.holly-wood.it/tmp/LEGODraw/m3496.dat Third Batch] (with different content) and at [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/3496.dat Part Tracker]
|cleaner=
|status=Awaiting comparision and renumbering.
|bgcolor=DDD
}}

{{FSBChartItem
|number=41890
|imagename=41890_G
|notes=
|cleaner=
|status=Awaiting cleanse.
|bgcolor=DDD
}}

{{FSBChartItem
|number=47406
|imagename=47406_G
|notes=Also present in [http://www.holly-wood.it/tmp/LEGODraw/m47406.dat Third Batch]
|cleaner=
|status=Awaiting cleanse.
|bgcolor=DDD
}}

{{FSBChartItem
|number=47976
|imagename=47976_G
|notes=
|cleaner=
|status=Awaiting cleanse.
|bgcolor=DDD
}}

{{FSBChartItem
|number=48005
|imagename=48005_G
|notes=Also present in [http://www.holly-wood.it/tmp/LEGODraw/m48005.dat Third Batch]
|cleaner=
|status=Awaiting cleanse.
|bgcolor=DDD
}}

{{FSBChartItem
|number=58827
|imagename=58827_G
|notes=Also present in [http://www.holly-wood.it/tmp/LEGODraw/m58827.dat Third Batch]
|cleaner=
|status=Awaiting cleanse.
|bgcolor=DDD
}}
|}

{{L(EGO)Draw Page Nav}}
[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 3

2010-05-06T23:14:40Z

Arezey: /* 4xxxx */ yoke done

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2009-10-13'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:
*change the bgcolor= field from ''DDD'' (gray) to ''FF8'' (yellow)
*type your username into the cleaner= field
*change status= field into ''Cleanse in progress''

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

This first page contains only the parts from 2xxxx to 4xxxx - please see [[L(EGO)Draw Third Batch New Parts Chart Page Two|page two]] for 5xxxx - 8xxxx.

__TOC__

=2xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2543
|cleaner=
|notes=Peeron number x70. Also present in [http://www.ldraw.org/files/L(EGO)Draw_2543.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=2588
|cleaner=
|notes=Peeron lists it erroneously as 2888
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=2594
|cleaner=
|notes=Is [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/2594.dat an unofficial part at PT], but has been hold-voted for many problems.
|status=Pending
|bgcolor=DDD
}}

|}

=3xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=30044
|cleaner=
|notes=Is an official part but has dimensional issues. LUT version could be used to fix dimensional issues.
If we do that, the Arch 6182 also needs to be redesigned.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30045
|cleaner=
|notes=Is [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/30045.dat a part on PT] but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30046
|cleaner=
|notes=Is an official part but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30121
|cleaner=
|notes=LUT version seems different from photo at Peeron (to be verified).
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30133
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30158
|cleaner=
|notes=Official part is in closed configuration. LUT version can be used for the open one.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30168
|cleaner=
|notes=Peeron number x177. Also present in [http://www.ldraw.org/files/L(EGO)Draw_30168.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30177
|cleaner=
|notes=Peeron number x54. Also present in [http://www.ldraw.org/files/L(EGO)Draw_30177.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30191
|cleaner=
|notes=End and middle should be subparted for flex-synthesis
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30214
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30218
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30224
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30238
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30240
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30276
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30276.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30323
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30325
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30325.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30381
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30475
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30529
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30530
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30593
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30608
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30608.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32146
|cleaner=Philo
|notes=
|status=Cleanse in progress
|bgcolor=FF8
}}

{{ChartItem
|number=33009
|cleaner=
|notes=Official part is closed, LUT version is open
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33057
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33078
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33129
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_33129.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33170
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33175
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

=4xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=40235
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40238
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40240
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40251
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40339
|cleaner=
|notes=Unofficial part at PT is at mockup stage and needs the tip re-written
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=40384
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40385
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40388
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40393
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41140
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41141
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42409
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42443
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42444
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42511
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42611
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4328
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4332
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43746
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43751
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43889
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43894
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_43894.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43900
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43936
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4429
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4433
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45106
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45172
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45173
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47406
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_47406.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47577
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47899
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4794
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48005
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_48005.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48284
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48485
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48486
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48487
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48489
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 3

2010-05-06T21:09:29Z

Arezey: /* 4xxxx */

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2009-10-13'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:
*change the bgcolor= field from ''DDD'' (gray) to ''FF8'' (yellow)
*type your username into the cleaner= field
*change status= field into ''Cleanse in progress''

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

This first page contains only the parts from 2xxxx to 4xxxx - please see [[L(EGO)Draw Third Batch New Parts Chart Page Two|page two]] for 5xxxx - 8xxxx.

__TOC__

=2xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2543
|cleaner=
|notes=Peeron number x70. Also present in [http://www.ldraw.org/files/L(EGO)Draw_2543.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=2588
|cleaner=
|notes=Peeron lists it erroneously as 2888
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=2594
|cleaner=
|notes=Is [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/2594.dat an unofficial part at PT], but has been hold-voted for many problems.
|status=Pending
|bgcolor=DDD
}}

|}

=3xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=30044
|cleaner=
|notes=Is an official part but has dimensional issues. LUT version could be used to fix dimensional issues.
If we do that, the Arch 6182 also needs to be redesigned.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30045
|cleaner=
|notes=Is [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/30045.dat a part on PT] but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30046
|cleaner=
|notes=Is an official part but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30121
|cleaner=
|notes=LUT version seems different from photo at Peeron (to be verified).
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30133
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30158
|cleaner=
|notes=Official part is in closed configuration. LUT version can be used for the open one.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30168
|cleaner=
|notes=Peeron number x177. Also present in [http://www.ldraw.org/files/L(EGO)Draw_30168.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30177
|cleaner=
|notes=Peeron number x54. Also present in [http://www.ldraw.org/files/L(EGO)Draw_30177.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30191
|cleaner=
|notes=End and middle should be subparted for flex-synthesis
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30214
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30218
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30224
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30238
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30240
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30276
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30276.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30323
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30325
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30325.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30381
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30475
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30529
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30530
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30593
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30608
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30608.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32146
|cleaner=Philo
|notes=
|status=Cleanse in progress
|bgcolor=FF8
}}

{{ChartItem
|number=33009
|cleaner=
|notes=Official part is closed, LUT version is open
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33057
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33078
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33129
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_33129.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33170
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33175
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

=4xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=40001
|cleaner=arezey
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_40001.dat First Batch]
|status=Cleanse in progress
|bgcolor=FF8
}}

{{ChartItem
|number=40235
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40238
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40240
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40251
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40339
|cleaner=
|notes=Unofficial part at PT is at mockup stage and needs the tip re-written
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=40384
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40385
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40388
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40393
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41140
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41141
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42409
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42443
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42444
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42511
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42611
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4328
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4332
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43746
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43751
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43889
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43894
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_43894.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43900
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43936
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4429
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4433
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45106
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45172
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45173
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47406
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_47406.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47577
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47899
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4794
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48005
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_48005.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48284
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48485
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48486
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48487
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48489
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

L(EGO)Draw New Parts Batch 3

2010-04-21T17:28:19Z

Arezey: /* 3xxxx */ ups

This chart lists all new and uncleaned parts from the third LEGO Universe Team part shape batch. All files below use the !HISTORY date '''2009-10-13'''.

When picking a part to work on, please edit the page, scroll down to the part entry's ChartItem template (or Control-F there), and:
*change the bgcolor= field from ''DDD'' (gray) to ''FF8'' (yellow)
*type your username into the cleaner= field
*change status= field into ''Cleanse in progress''

When you have finished your part and submitted it to the Parts Tracker, please remove the part's ChartItem completely from the page. Doing so prevents work overlap.

This first page contains only the parts from 2xxxx to 4xxxx - please see [[L(EGO)Draw Third Batch New Parts Chart Page Two|page two]] for 5xxxx - 8xxxx.

__TOC__

=2xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=2543
|cleaner=
|notes=Peeron number x70. Also present in [http://www.ldraw.org/files/L(EGO)Draw_2543.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=2588
|cleaner=
|notes=Peeron lists it erroneously as 2888
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=2594
|cleaner=
|notes=Is [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/2594.dat an unofficial part at PT], but has been hold-voted for many problems.
|status=Pending
|bgcolor=DDD
}}

|}

=3xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=30044
|cleaner=
|notes=Is an official part but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30045
|cleaner=
|notes=Is [http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/30045.dat a part on PT] but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30046
|cleaner=
|notes=Is an official part but has dimensional issues. LUT version could be used to fix dimensional issues.
|status=
|bgcolor=DCDCDC
}}

{{ChartItem
|number=30121
|cleaner=
|notes=LUT version seems different from photo at Peeron (to be verified).
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30133
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30158
|cleaner=
|notes=Official part is in closed configuration. LUT version can be used for the open one.
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30168
|cleaner=
|notes=Peeron number x177. Also present in [http://www.ldraw.org/files/L(EGO)Draw_30168.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30177
|cleaner=
|notes=Peeron number x54. Also present in [http://www.ldraw.org/files/L(EGO)Draw_30177.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30191
|cleaner=
|notes=End and middle should be subparted for flex-synthesis
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30214
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30218
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30224
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30238
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30240
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30276
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30276.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30323
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30325
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30325.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30381
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30475
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30529
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30530
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30593
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=30608
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_30608.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=32146
|cleaner=Philo
|notes=
|status=Cleanse in progress
|bgcolor=FF8
}}

{{ChartItem
|number=33009
|cleaner=
|notes=Official part is closed, LUT version is open
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33057
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33078
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33129
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_33129.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33170
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=33175
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}
|}

=4xxxx=

{| class="wikitable sortable" cellpadding="3" width="800"
|-

!Thumbnail
!Number
!Cleaner
!Notes
!Status
|-

{{ChartItem
|number=40001
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_40001.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40235
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40238
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40240
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40251
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40339
|cleaner=
|notes=Unofficial part at PT is at mockup stage and needs the tip re-written
|status=Awaiting actions
|bgcolor=DDD
}}

{{ChartItem
|number=40384
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40385
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40388
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=40393
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41140
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=41141
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42409
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42443
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42444
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42511
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=42611
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4328
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4332
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43746
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43751
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43889
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43894
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_43894.dat Second Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43900
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=43936
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4429
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4433
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45106
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45172
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=45173
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47406
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_47406.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47577
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=47899
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=4794
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48005
|cleaner=
|notes=Also present in [http://www.ldraw.org/files/L(EGO)Draw_48005.dat First Batch]
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48284
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48485
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48486
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48487
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48488
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

{{ChartItem
|number=48489
|cleaner=
|notes=
|status=Awaiting cleanse
|bgcolor=DDD
}}

|}

{{L(EGO)Draw Page Nav}}

[[Category:Terms]]
[[Category:Repositories]]

Template:Stub

2010-04-15T21:01:23Z

Arezey: duh

{{ImageMessageBox
|bgcolor=#555
|ltbgcolor=#ddd
|textcolor=black
|caption=Stub
|image=[[Image:Stub.png]]
|text=This page is a stub. You can help the LDraw.org Wiki by improving it.
}}
 
<includeonly>
[[Category:Needs Work]]
</includeonly>

MLCAD

2010-04-15T21:01:02Z

Arezey:

#REDIRECT [[MLCad]]

Template:Software

2010-04-15T21:00:27Z

Arezey: replace white with black

{| style="border: 1px solid black; width: 300px; float:right" cellspacing="0" cellpadding="5"
|-
| colspan="2" style="background-color: #888; color: black; text-align:center; font-size: 16px" | '''{{PAGENAME}}'''
|-
| colspan="2" style="background-color: #888; color: black; text-align:center; padding-top: 0px" | '''Software'''
|-
| style="background-color: #888; color: black" | '''Developer(s)'''
| style="background-color: #DDD; color: black; border-top: 1px solid black; border-left: 1px solid black" | {{{developer}}}
|-
| style="background-color: #888; color: black" | '''Function(s)'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{function}}}
|-
| style="background-color: #888; color: black" | '''Current version'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{version}}}
|-
| style="background-color: #888; color: black" | '''Platform(s)'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{platform}}}
|-
| style="background-color: #888; color: black" | '''Website'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{website}}}
|-
|}
<includeonly>[[Category:Software]]</includeonly>

Template:Software

2010-04-11T18:50:53Z

Arezey: better bordering

{| style="border: 1px solid black; width: 300px; float:right" cellspacing="0" cellpadding="5"
|-
| colspan="2" style="background-color: #888; color: white; text-align:center; font-size: 16px" | '''{{PAGENAME}}'''
|-
| colspan="2" style="background-color: #888; color: white; text-align:center; padding-top: 0px" | '''Software'''
|-
| style="background-color: #888; color: white" | '''Developer(s)'''
| style="background-color: #DDD; color: black; border-top: 1px solid black; border-left: 1px solid black" | {{{developer}}}
|-
| style="background-color: #888; color: white" | '''Function(s)'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{function}}}
|-
| style="background-color: #888; color: white" | '''Current version'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{version}}}
|-
| style="background-color: #888; color: white" | '''Platform(s)'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{platform}}}
|-
| style="background-color: #888; color: white" | '''Website'''
| style="background-color: #DDD; color: black; border-left: 1px solid black" | {{{website}}}
|-
|}
<includeonly>[[Category:Software]]</includeonly>

LDraw Files Requirements

2010-04-11T18:47:26Z

Arezey:

Parts made for the [[LDraw]] parts library are bound to certain '''technical restrictions'''. These restrictions may confuse new part authors and thus they are listed here, along with the methods of fixing them. Taking care of these restrictions will also give more probability for fast certification at the [[Parts Tracker|parts tracker]].

These issues are checked for and typically corrected by the [[DATHeader]] tool.

==Issue types==
===Filename and title length===
Filenames of parts are to be no longer than twenty-five characters, including the .dat-extension. This restriction was eight characters plus the .dat-extension (DOS filename length), but was recently extended. Titles of parts are to be no longer than sixty-four characters in length.

[[Image:ComplexityExample.png|thumb|right|Example of complexity. The quadrilateral on the left is simple as it is meant to be. The one on the right is complex as it intersects itself.]]
===Complex quadrilaterals===
'''Complexity''' means that the internal facet lines of quadrilaterals intersect themselves. They are also nicknamed as "'''bowtie quadrilaterals'''" on the parts tracker. They are corrected by changing the order of the vertices, making it simple again. Complexity is not an issue for triangles as they, having only three vertices, are unable to intersect themselves.

[[Image:ConcavityExample.png|thumb|left|Example of concavity. The quadrilateral on the left is clearly concave. The right shape is the same quadrilateral split into two triangles.]]
===Concavity===
'''Concavity''' means that an internal angle of a quadrilateral is greater than 179.9 degrees or smaller than 0.025 degrees, as taken from the official specifications. The fix for concavity is to split them into two triangles. Triangles, having only three vertices, are always convex.

===Non-co-planarity===
'''Non-co-planarity''' means that all vertices of a quadrilateral do not reside in the same plane. Quadrilaterals like this, that have one point outside the plane, are also nicknamed as "'''warped quads'''" on the parts tracker. These quadrilaterals are typically present in curved shapes. Non-co-planar quadrilaterals are tolerated up to three degrees, with one degree limit being "ideal", especially for large quadrilaterals. The fix to these quadrilaterals is to split them into two triangles. Triangles, having only three vertices, are always co-planar.

===Collinearity===
[[Image:CollinearityExample.png|thumb|right|Example of collinearity. The polygon shown is actually a quadrilateral with three vertices residing in a straight line.]]
'''Collinearity''' means that three or more vertices of a polygon reside in the same straight line. Polygons like this are also nicknamed as "'''degenerated''' or '''deformed polygons'''" on the parts tracker.

These are dealt with case-by-case basis. Collinear triangles, being only lines, are typically deleted, while quadrilaterals are either turned into triangles by deleting the middle vertex within the line (if three within same line) or deleting it entirely (if all four). '''However''', needle polygons like this can be troublesome as their lengthy facet lines might warp a little bit after reforming, causing gaps, so care should be taken when correcting these.

===Duplicates===
Two or more copies of the same, '''identical''' polygon or subfile may not exist within the file. They are typically easy to fix by just deleting the duplicate in question.

===Overlapping and intersecting===
The exact rules for '''overlapping''' may be confusing. According to the official specifications:
<pre>All or part of a line (line type 2) may not overlap all or part of any other line (line type 2).

All or part of a conditional line (line type 5) may not overlap all or part of any other conditional line (line type 5).

Part (but not all) of a conditional line (line type 5) may overlap all (but not part) of a line (line type 2).
Consider the line A-B-C-D
If AB and CD need to be conditional lines and BC a line, it is acceptable to define this as a line BC and a single
conditional line AD
If AC needs to be a line and just CD needs to be a conditional line, it is not acceptable to define the conditional
line as either AD or BD
If AD is a line, there are no valid conditional lines along the length of AD

Lines (line type 2 or 5) may intersect any other line (line type 2 or 5).

Every effort must be made to remove overlapping co-planar polygons (line type 3 or 4). Where overlapping polygons are
unavoidable, the overlap must be kept to the absolute minimum.

Every effort must be made to remove intersecting (non co-planar) polygons (line type 3 or 4). Where intersecting
polygons are unavoidable, the intersection(s) must be kept to the absolute minimum.

Note: Primitives that overlap/intersect other primitives or polygons (line type 3 or 4), provided that the overlap
is small, are considered acceptable. The intention is not to force part authors to in-line primitives. However, there
may be some cases where it is better to use (say) a 3-8cyli and a quad than a 1-2cyli; case-by-case decisions are left
to the parts review process.</pre>

However, these rules are often flouted in the interests of saving disk space and for convenience of the part authors. Polygons and primitives typically bleed into the interiors of parts as the interiors are not seen by the end user. However, polygons of different colours may not overlap each other and every effort should be taken to remove overlaps and bleed-ins when the part in question is sold by LEGO in transparent colours.

===Matrix rule===
Matrices of subpart references may not contain rows or columns all zero. Say, an edge circle of:
<pre>1 16 0 0 0 1 0 0 0 1 0 0 0 1</pre>
is considered valid, but:
<pre>1 16 0 0 0 1 0 0 0 0 0 0 0 1</pre>
has the Y-row (middle row) all zero. Also, seen the other way, the second line has the middle column all zero (all middle numbers are zero).

===Colour restrictions===
Polygons may not use the edge colour #24, nor can lines use main colour #16. In the past lines using main colour were used for:
*where a line is being used for fine detail within a pattern and that pattern is re-used within many parts (and hence sub-parted) in different colours (for example, sub-part s/973p11a.dat)
*when a sub-part pattern leaves a narrow gap of base-part colour around the pattern (for example, see sub-part s/973p11b.dat)
(as taken from official specs). However, gaps are these days not really tolerated and fine details is no longer marked with lines.

All colours, except for pattern colours, must be present within [[LDConfig.ldr]]

Also polygons should always be of colour 16 unless a printed pattern is in question. This is not mentioned in official specifications but is enforced on the parts tracker.

===Header specifications===
The header is these days formalized and should be formatted in new parts. While not typically enforced by hold votes on the parts tracker, it is polite and of good practice to format the header when submitting parts to cut down the work the tracker administrator needs to do. The [[DATHeader]] tool was made for automatic header formatting in the first place and does this job well.

===Line termination===
All lines are to be terminated with a <nowiki><CR><LF></nowiki>-sequence, i.e. the DOS line ending. The last two bytes of part files are to be the DOS line ending as well.

[[Category:LDraw.org]]

LDraw Files Requirements

2010-04-11T18:47:00Z

Arezey:

Parts made for the [[LDraw]] parts library are bound to certain '''technical restrictions'''. These restrictions may confuse new part authors and thus they are listed here, along with the methods of taking care of them. Taking care of these restrictions will also give more probability for fast certification at the [[Parts Tracker|parts tracker]].

These issues are checked for and typically corrected by the [[DATHeader]] tool.

==Issue types==
===Filename and title length===
Filenames of parts are to be no longer than twenty-five characters, including the .dat-extension. This restriction was eight characters plus the .dat-extension (DOS filename length), but was recently extended. Titles of parts are to be no longer than sixty-four characters in length.

[[Image:ComplexityExample.png|thumb|right|Example of complexity. The quadrilateral on the left is simple as it is meant to be. The one on the right is complex as it intersects itself.]]
===Complex quadrilaterals===
'''Complexity''' means that the internal facet lines of quadrilaterals intersect themselves. They are also nicknamed as "'''bowtie quadrilaterals'''" on the parts tracker. They are corrected by changing the order of the vertices, making it simple again. Complexity is not an issue for triangles as they, having only three vertices, are unable to intersect themselves.

[[Image:ConcavityExample.png|thumb|left|Example of concavity. The quadrilateral on the left is clearly concave. The right shape is the same quadrilateral split into two triangles.]]
===Concavity===
'''Concavity''' means that an internal angle of a quadrilateral is greater than 179.9 degrees or smaller than 0.025 degrees, as taken from the official specifications. The fix for concavity is to split them into two triangles. Triangles, having only three vertices, are always convex.

===Non-co-planarity===
'''Non-co-planarity''' means that all vertices of a quadrilateral do not reside in the same plane. Quadrilaterals like this, that have one point outside the plane, are also nicknamed as "'''warped quads'''" on the parts tracker. These quadrilaterals are typically present in curved shapes. Non-co-planar quadrilaterals are tolerated up to three degrees, with one degree limit being "ideal", especially for large quadrilaterals. The fix to these quadrilaterals is to split them into two triangles. Triangles, having only three vertices, are always co-planar.

===Collinearity===
[[Image:CollinearityExample.png|thumb|right|Example of collinearity. The polygon shown is actually a quadrilateral with three vertices residing in a straight line.]]
'''Collinearity''' means that three or more vertices of a polygon reside in the same straight line. Polygons like this are also nicknamed as "'''degenerated''' or '''deformed polygons'''" on the parts tracker.

These are dealt with case-by-case basis. Collinear triangles, being only lines, are typically deleted, while quadrilaterals are either turned into triangles by deleting the middle vertex within the line (if three within same line) or deleting it entirely (if all four). '''However''', needle polygons like this can be troublesome as their lengthy facet lines might warp a little bit after reforming, causing gaps, so care should be taken when correcting these.

===Duplicates===
Two or more copies of the same, '''identical''' polygon or subfile may not exist within the file. They are typically easy to fix by just deleting the duplicate in question.

===Overlapping and intersecting===
The exact rules for '''overlapping''' may be confusing. According to the official specifications:
<pre>All or part of a line (line type 2) may not overlap all or part of any other line (line type 2).

All or part of a conditional line (line type 5) may not overlap all or part of any other conditional line (line type 5).

Part (but not all) of a conditional line (line type 5) may overlap all (but not part) of a line (line type 2).
Consider the line A-B-C-D
If AB and CD need to be conditional lines and BC a line, it is acceptable to define this as a line BC and a single
conditional line AD
If AC needs to be a line and just CD needs to be a conditional line, it is not acceptable to define the conditional
line as either AD or BD
If AD is a line, there are no valid conditional lines along the length of AD

Lines (line type 2 or 5) may intersect any other line (line type 2 or 5).

Every effort must be made to remove overlapping co-planar polygons (line type 3 or 4). Where overlapping polygons are
unavoidable, the overlap must be kept to the absolute minimum.

Every effort must be made to remove intersecting (non co-planar) polygons (line type 3 or 4). Where intersecting
polygons are unavoidable, the intersection(s) must be kept to the absolute minimum.

Note: Primitives that overlap/intersect other primitives or polygons (line type 3 or 4), provided that the overlap
is small, are considered acceptable. The intention is not to force part authors to in-line primitives. However, there
may be some cases where it is better to use (say) a 3-8cyli and a quad than a 1-2cyli; case-by-case decisions are left
to the parts review process.</pre>

However, these rules are often flouted in the interests of saving disk space and for convenience of the part authors. Polygons and primitives typically bleed into the interiors of parts as the interiors are not seen by the end user. However, polygons of different colours may not overlap each other and every effort should be taken to remove overlaps and bleed-ins when the part in question is sold by LEGO in transparent colours.

===Matrix rule===
Matrices of subpart references may not contain rows or columns all zero. Say, an edge circle of:
<pre>1 16 0 0 0 1 0 0 0 1 0 0 0 1</pre>
is considered valid, but:
<pre>1 16 0 0 0 1 0 0 0 0 0 0 0 1</pre>
has the Y-row (middle row) all zero. Also, seen the other way, the second line has the middle column all zero (all middle numbers are zero).

===Colour restrictions===
Polygons may not use the edge colour #24, nor can lines use main colour #16. In the past lines using main colour were used for:
*where a line is being used for fine detail within a pattern and that pattern is re-used within many parts (and hence sub-parted) in different colours (for example, sub-part s/973p11a.dat)
*when a sub-part pattern leaves a narrow gap of base-part colour around the pattern (for example, see sub-part s/973p11b.dat)
(as taken from official specs). However, gaps are these days not really tolerated and fine details is no longer marked with lines.

All colours, except for pattern colours, must be present within [[LDConfig.ldr]]

Also polygons should always be of colour 16 unless a printed pattern is in question. This is not mentioned in official specifications but is enforced on the parts tracker.

===Header specifications===
The header is these days formalized and should be formatted in new parts. While not typically enforced by hold votes on the parts tracker, it is polite and of good practice to format the header when submitting parts to cut down the work the tracker administrator needs to do. The [[DATHeader]] tool was made for automatic header formatting in the first place and does this job well.

===Line termination===
All lines are to be terminated with a <nowiki><CR><LF></nowiki>-sequence, i.e. the DOS line ending. The last two bytes of part files are to be the DOS line ending as well.

[[Category:LDraw.org]]

Technical restrictions

2010-04-11T18:46:09Z

Arezey: kill double redirect

#REDIRECT [[LDraw technical restrictions]]

LDraw Technical restrictions

2010-04-11T18:45:49Z

Arezey: LDraw Technical restrictions moved to LDraw technical restrictions: lowercase t

#REDIRECT [[LDraw technical restrictions]]

LDraw Files Requirements

2010-04-11T18:45:49Z

Arezey: LDraw Technical restrictions moved to LDraw technical restrictions: lowercase t

Parts made for the [[LDraw]] parts library are bound to certain '''technical restrictions'''. These restrictions may confuse newbie part authors and thus they are listed here, along with the methods of taking care of them. Taking care of these restrictions will also give more probability for fast certification at the [[Parts Tracker|parts tracker]].

These issues are checked for and typically corrected by the [[DATHeader]] tool.

==Issue types==
===Filename and title length===
Filenames of parts are to be no longer than twenty-five characters, including the .dat-extension. This restriction was eight characters plus the .dat-extension (DOS filename length), but was recently extended. Titles of parts are to be no longer than sixty-four characters in length.

[[Image:ComplexityExample.png|thumb|right|Example of complexity. The quadrilateral on the left is simple as it is meant to be. The one on the right is complex as it intersects itself.]]
===Complex quadrilaterals===
'''Complexity''' means that the internal facet lines of quadrilaterals intersect themselves. They are also nicknamed as "'''bowtie quadrilaterals'''" on the parts tracker. They are corrected by changing the order of the vertices, making it simple again. Complexity is not an issue for triangles as they, having only three vertices, are unable to intersect themselves.

[[Image:ConcavityExample.png|thumb|left|Example of concavity. The quadrilateral on the left is clearly concave. The right shape is the same quadrilateral split into two triangles.]]
===Concavity===
'''Concavity''' means that an internal angle of a quadrilateral is greater than 179.9 degrees or smaller than 0.025 degrees, as taken from the official specifications. The fix for concavity is to split them into two triangles. Triangles, having only three vertices, are always convex.

===Non-co-planarity===
'''Non-co-planarity''' means that all vertices of a quadrilateral do not reside in the same plane. Quadrilaterals like this, that have one point outside the plane, are also nicknamed as "'''warped quads'''" on the parts tracker. These quadrilaterals are typically present in curved shapes. Non-co-planar quadrilaterals are tolerated up to three degrees, with one degree limit being "ideal", especially for large quadrilaterals. The fix to these quadrilaterals is to split them into two triangles. Triangles, having only three vertices, are always co-planar.

===Collinearity===
[[Image:CollinearityExample.png|thumb|right|Example of collinearity. The polygon shown is actually a quadrilateral with three vertices residing in a straight line.]]
'''Collinearity''' means that three or more vertices of a polygon reside in the same straight line. Polygons like this are also nicknamed as "'''degenerated''' or '''deformed polygons'''" on the parts tracker.

These are dealt with case-by-case basis. Collinear triangles, being only lines, are typically deleted, while quadrilaterals are either turned into triangles by deleting the middle vertex within the line (if three within same line) or deleting it entirely (if all four). '''However''', needle polygons like this can be troublesome as their lengthy facet lines might warp a little bit after reforming, causing gaps, so care should be taken when correcting these.

===Duplicates===
Two or more copies of the same, '''identical''' polygon or subfile may not exist within the file. They are typically easy to fix by just deleting the duplicate in question.

===Overlapping and intersecting===
The exact rules for '''overlapping''' may be confusing. According to the official specifications:
<pre>All or part of a line (line type 2) may not overlap all or part of any other line (line type 2).

All or part of a conditional line (line type 5) may not overlap all or part of any other conditional line (line type 5).

Part (but not all) of a conditional line (line type 5) may overlap all (but not part) of a line (line type 2).
Consider the line A-B-C-D
If AB and CD need to be conditional lines and BC a line, it is acceptable to define this as a line BC and a single
conditional line AD
If AC needs to be a line and just CD needs to be a conditional line, it is not acceptable to define the conditional
line as either AD or BD
If AD is a line, there are no valid conditional lines along the length of AD

Lines (line type 2 or 5) may intersect any other line (line type 2 or 5).

Every effort must be made to remove overlapping co-planar polygons (line type 3 or 4). Where overlapping polygons are
unavoidable, the overlap must be kept to the absolute minimum.

Every effort must be made to remove intersecting (non co-planar) polygons (line type 3 or 4). Where intersecting
polygons are unavoidable, the intersection(s) must be kept to the absolute minimum.

Note: Primitives that overlap/intersect other primitives or polygons (line type 3 or 4), provided that the overlap
is small, are considered acceptable. The intention is not to force part authors to in-line primitives. However, there
may be some cases where it is better to use (say) a 3-8cyli and a quad than a 1-2cyli; case-by-case decisions are left
to the parts review process.</pre>

However, these rules are often flouted in the interests of saving disk space and for convenience of the part authors. Polygons and primitives typically bleed into the interiors of parts as the interiors are not seen by the end user. However, polygons of different colours may not overlap each other and every effort should be taken to remove overlaps and bleed-ins when the part in question is sold by LEGO in transparent colours.

===Matrix rule===
Matrices of subpart references may not contain rows or columns all zero. Say, an edge circle of:
<pre>1 16 0 0 0 1 0 0 0 1 0 0 0 1</pre>
is considered valid, but:
<pre>1 16 0 0 0 1 0 0 0 0 0 0 0 1</pre>
has the Y-row (middle row) all zero. Also, seen the other way, the second line has the middle column all zero (all middle numbers are zero).

===Colour restrictions===
Polygons may not use the edge colour #24, nor can lines use main colour #16. In the past lines using main colour were used for:
*where a line is being used for fine detail within a pattern and that pattern is re-used within many parts (and hence sub-parted) in different colours (for example, sub-part s/973p11a.dat)
*when a sub-part pattern leaves a narrow gap of base-part colour around the pattern (for example, see sub-part s/973p11b.dat)
(as taken from official specs). However, gaps are these days not really tolerated and fine details is no longer marked with lines.

All colours, except for pattern colours, must be present within [[LDConfig.ldr]]

Also polygons should always be of colour 16 unless a printed pattern is in question. This is not mentioned in official specifications but is enforced on the parts tracker.

===Header specifications===
The header is these days formalized and should be formatted in new parts. While not typically enforced by hold votes on the parts tracker, it is polite and of good practice to format the header when submitting parts to cut down the work the tracker administrator needs to do. The [[DATHeader]] tool was made for automatic header formatting in the first place and does this job well.

===Line termination===
All lines are to be terminated with a <nowiki><CR><LF></nowiki>-sequence, i.e. the DOS line ending. The last two bytes of part files are to be the DOS line ending as well.

[[Category:LDraw.org]]

LDraw Files Requirements

2010-04-11T18:44:24Z

Arezey: /* Header specifications */ maybe like this?

L(EGO)Draw Parts

2010-04-09T16:26:58Z

Arezey:

[[Image:30464.png|30464.dat, one of the many parts from the LEGO Universe Team.|thumb|right|100px]]
The LDraw Steering Committee has been in contact with the LEGO Universe team, and to ease up the conversion between LDraw and LEGO Digital Designer, the LEGO Universe Team has shared part shapes with the LDraw.org community. So far the community has received three batches of parts, with the third batch being by far the largest and with most files to cleanse. However, being batches of raw data, the parts need some cleanup to be suitable for the parts library.

==Cleansing==
To help by cleansing a part, just go through the new parts charts and download the file you want to work on, but do not forget to edit the chart to show that you are working on the part in order to avoid overlap.

There is also a set of twenty-nine pages detailing all parts the community received from the LEGO Universe Team's third batch. These pages were originally where parts were picked from and cleansed, today they more serve as reference to the third batch. See the bottom of the page for a navigation template.

While cleansing, special attention has to be paid to [http://www.ldraw.org/Article398.html header specifications], [http://www.ldraw.org/Article415.html back face culling], color correction, primitive substitution, subfiling, code grouping and origin and orientation choosing.

Note the green polygons in part files, they may contain errors. Treat these with care.

The m-prefix found in the filenames of the third batch's files have been added by the LEGO Universe Team for internal reasons, please remove them.

The submitted part also should contain two !HISTORY lines due to the nature of these parts:
<pre>0 !HISTORY YYYY-MM-DD {The LEGO Universe Team} Original part shape
0 !HISTORY YYYY-MM-DD [UserName] File preparation for LDraw Parts Tracker</pre>

LEGO Universe Team's !HISTORY date is the date the batch was shared, the parts charts contain the dates needed here. The latter date is the date you finish cleaning the part.

==Important notes==
*Only authors who have affirmed the LDraw [http://www.ldraw.org/Article349.html Contributor Agreement] are allowed to submit cleansed files to the [[Parts Tracker]].
*Once the part has been submitted to the Parts Tracker, any reviewer finding errors is allowed to immediately fix them and resubmit the fixed part without asking permission since the original author is the LEGO Universe Team. This means that anybody can fix sent parts without waiting the three months after posting a hold vote. However, note that while reviewing these parts, it is of good manner to rather point out the error than to immediately go fix it.
*Some parts have come in multiple batches - when editing wiki pages, please check if there are duplicates in the other two batches.

==Related articles==
*[http://news.lugnet.com/cad/?n=14836 Preparing a L(EGO)Draw part for the Parts Tracker - a review]
*[http://news.lugnet.com/cad/dat/parts/?n=6212 L(EGO)Draw part discrepancies]

{{L(EGO)Draw Page Nav}}
[[Category:LDraw.org]]
[[Category:Terms]]
[[Category:Repositories]]

Macintosh-Compatible LDraw Software

2010-04-09T16:25:30Z

Arezey: /* Utilities */

This is an inventory of Macintosh compatible LDraw software. Everyone is encouraged to contribute updates, clarifications, and corrections to this page. The objective is to compile and maintain a definitive list of the tools Mac users have at their disposal to work with the LDraw system.

== Editors ==

These programs can be used to create LDraw models.

* '''[[Bricksmith]]''': Arguably the premier Macintosh LDraw editor. Features a minifig editor, mouse-based part movement (as well as keyboard controls), and a searchable part browser.
* [http://ldglite.sourceforge.net/ '''ldglite''']: Keyboard oriented editor with numerous options. Faithful to the original LDraw and LEdit interface.
* '''[[LEGO Digital Designer]]''': Limited conversion between LDraw and LDD formats is [[LDraw to LDD conversion|possible]].
* [http://olson.pair.com/brickdraw3d/ '''BrickDraw3D''']: Features drag-and-drop part insertion and movement.

== Viewers ==

These programs are primarily intended to view existing LDraw models.

* '''[[LDView]]''': Robust viewer with fly-through mode, automatic part downloading, and numerous rendering options.
* [http://www.hassings.dk/l3/l3lab.html '''L3Lab''']: Viewer with many useful options including an "exploded" view.
* [http://www.magnusviri.com/lego/downloads/lcx.html '''LCX''']: Experimental viewer with BFC tools and a rudimentary text-based editor.

== Instructions ==

Create step-by-step instructions to show others how to build your models.

* [http://www.kclague.net/LPub4.htm '''LPub''']: Page layout program to create building instructions for LDraw models.

== Utilities ==

Most of these utilities are command line programs, so some familiarity with the [http://en.wikipedia.org/wiki/Terminal_(application) Terminal] is needed to use them.

* [http://lego.bldesign.org/LSculpt/ '''LSculpt''']: Generate "studs-out" LDraw surfaces from arbitrary 3D models.
* [http://www.kclague.net/LSynth/ '''LSynth'''] and [http://anoved.net/2007/04/lsynth-service.html '''LSynth Service''']: Synthesize flexible elements like hoses and chains.
* [http://www.hassings.dk/l3/l3p.html '''L3P'''] and [http://www.magnusviri.com/lego/downloads/l3p.html '''L3P Launcher''']: Convert LDraw files to [http://www.povray.org/ POV-Ray] format for high-quality rendering. [http://www.el-lutzo.de/lego/lgeo.html LGEO] parts can be substituted. [http://www.hassings.dk/l3/lgeofix.html]
* [http://anoved.net/2007/10/prel3p.html '''PreL3P''']: Convert newer color codes to a format understood by L3P.
* [http://www.br-eng.info/my-lego-roscomenu-29/my-ldraw-roscomenu-45/17-my-ldraw/50-txt2dat '''txt2dat''']: Generate textual LDraw stickers.
* [http://www.philohome.com/isecalc/isecalc0.htm '''Isecalc''']: Compute part intersections.
* [http://www.philohome.com/isecalc/linetrim.htm '''Linetrim''']: Clip lines against surfaces.
* [http://www.philohome.com/isecalc/planarcheck.htm '''Planarcheck''']: Test quadrilateral coplanarity.
* [http://www.philohome.com/isecalc/coverer.htm '''Coverer''']: Generate a sheet of triangles and quads between lines.
* [http://www.philohome.com/isecalc/ytruder.htm '''Ytruder''']: Another way to generate a sheet of triangles and quads.
* [http://anoved.net/tw_ldraw_kit.html '''TextWrangler LDraw Kit'''] and [http://anoved.net/tw_ldraw_kit.html#ldlocate '''ldlocate''']: Improve TextWrangler's ability to edit LDraw files.
* [http://folk.uio.no/fredrigl/technic/ldraw-mode/ '''LDraw-mode for Emacs''']: Adds functionality for working with LDraw files to the Emacs editor. [http://folk.uio.no/fredrigl/technic/ldraw-mode/install-linux.html]
* [http://anoved.net/files/img2sticker-install.zip '''img2sticker''']: Convert images to optimized LDraw stickers. [http://news.lugnet.com/cad/?n=13017]
* [http://anoved.net/2007/10/ldmerge.html '''LDMerge''']: Merge and un-merge separate LDraw part libraries.
* [http://anoved.net/2007/11/ldraw-part-search-services.html '''Part Search Services''']: Look up selected part information in popular databases.
* [http://www.levork.org/l2rib.html '''l2rib''']: Convert LDraw models to RenderMan format.
* [http://anoved.net/2008/05/ldtrim.html '''LDTrim''']: Reformat LDraw code for clarity and consistency.

== Web ==

Although not strictly Macintosh oriented, [[Web-based Applications|web based]] LDraw tools are accessible to Mac users.

[[Category:Mac]]
[[Category:Software]]

Macintosh-Compatible LDraw Software

2010-04-09T16:24:23Z

Arezey: /* Editors */

This is an inventory of Macintosh compatible LDraw software. Everyone is encouraged to contribute updates, clarifications, and corrections to this page. The objective is to compile and maintain a definitive list of the tools Mac users have at their disposal to work with the LDraw system.

== Editors ==

These programs can be used to create LDraw models.

* '''[[Bricksmith]]''': Arguably the premier Macintosh LDraw editor. Features a minifig editor, mouse-based part movement (as well as keyboard controls), and a searchable part browser.
* [http://ldglite.sourceforge.net/ '''ldglite''']: Keyboard oriented editor with numerous options. Faithful to the original LDraw and LEdit interface.
* '''[[LEGO Digital Designer]]''': Limited conversion between LDraw and LDD formats is [[LDraw to LDD conversion|possible]].
* [http://olson.pair.com/brickdraw3d/ '''BrickDraw3D''']: Features drag-and-drop part insertion and movement.

== Viewers ==

These programs are primarily intended to view existing LDraw models.

* '''[[LDView]]''': Robust viewer with fly-through mode, automatic part downloading, and numerous rendering options.
* [http://www.hassings.dk/l3/l3lab.html '''L3Lab''']: Viewer with many useful options including an "exploded" view.
* [http://www.magnusviri.com/lego/downloads/lcx.html '''LCX''']: Experimental viewer with BFC tools and a rudimentary text-based editor.

== Instructions ==

Create step-by-step instructions to show others how to build your models.

* [http://www.kclague.net/LPub4.htm '''LPub''']: Page layout program to create building instructions for LDraw models.

== Utilities ==

Most of these utilities are command line programs, so some familiarity with the [http://en.wikipedia.org/wiki/Terminal_(application) Terminal] is needed to use them.

* [http://lego.bldesign.org/LSculpt/ '''LSculpt''']: Generate "studs-out" LDraw surfaces from arbitrary 3D models.
* [http://bricksmith.sourceforge.net/LSynth.html '''LSynth'''] and [http://anoved.net/2007/04/lsynth-service.html '''LSynth Service''']: Synthesize flexible elements like hoses and chains. [http://www.kclague.net/LSynth/]
* [http://www.hassings.dk/l3/l3p.html '''L3P'''] and [http://www.magnusviri.com/lego/downloads/l3p.html '''L3P Launcher''']: Convert LDraw files to [http://www.povray.org/ POV-Ray] format for high-quality rendering. [http://www.el-lutzo.de/lego/lgeo.html LGEO] parts can be substituted. [http://www.hassings.dk/l3/lgeofix.html]
* [http://anoved.net/2007/10/prel3p.html '''PreL3P''']: Convert newer color codes to a format understood by L3P.
* [http://www.br-eng.info/my-lego-roscomenu-29/my-ldraw-roscomenu-45/17-my-ldraw/50-txt2dat '''txt2dat''']: Generate textual LDraw stickers.
* [http://www.philohome.com/isecalc/isecalc0.htm '''Isecalc''']: Compute part intersections.
* [http://www.philohome.com/isecalc/linetrim.htm '''Linetrim''']: Clip lines against surfaces.
* [http://www.philohome.com/isecalc/planarcheck.htm '''Planarcheck''']: Test quadrilateral coplanarity.
* [http://www.philohome.com/isecalc/coverer.htm '''Coverer''']: Generate a sheet of triangles and quads between lines.
* [http://www.philohome.com/isecalc/ytruder.htm '''Ytruder''']: Another way to generate a sheet of triangles and quads.
* [http://anoved.net/tw_ldraw_kit.html '''TextWrangler LDraw Kit'''] and [http://anoved.net/tw_ldraw_kit.html#ldlocate '''ldlocate''']: Improve TextWrangler's ability to edit LDraw files.
* [http://folk.uio.no/fredrigl/technic/ldraw-mode/ '''LDraw-mode for Emacs''']: Adds functionality for working with LDraw files to the Emacs editor. [http://folk.uio.no/fredrigl/technic/ldraw-mode/install-linux.html]
* [http://anoved.net/files/img2sticker-install.zip '''img2sticker''']: Convert images to optimized LDraw stickers. [http://news.lugnet.com/cad/?n=13017]
* [http://anoved.net/2007/10/ldmerge.html '''LDMerge''']: Merge and un-merge separate LDraw part libraries.
* [http://anoved.net/2007/11/ldraw-part-search-services.html '''Part Search Services''']: Look up selected part information in popular databases.
* [http://www.levork.org/l2rib.html '''l2rib''']: Convert LDraw models to RenderMan format.
* [http://anoved.net/2008/05/ldtrim.html '''LDTrim''']: Reformat LDraw code for clarity and consistency.

== Web ==

Although not strictly Macintosh oriented, [[Web-based Applications|web based]] LDraw tools are accessible to Mac users.

[[Category:Mac]]
[[Category:Software]]

Macintosh-Compatible LDraw Software

2010-04-09T16:23:17Z

Arezey: /* Editors */

This is an inventory of Macintosh compatible LDraw software. Everyone is encouraged to contribute updates, clarifications, and corrections to this page. The objective is to compile and maintain a definitive list of the tools Mac users have at their disposal to work with the LDraw system.

== Editors ==

These programs can be used to create LDraw models.

* '''[[Bricksmith]]''': Arguably the premier Macintosh LDraw editor. Features a minifig editor, mouse-based part movement (as well as keyboard controls), and a searchable part browser.
* [http://ldglite.sourceforge.net/ '''ldglite''']: Keyboard oriented editor with numerous options. Faithful to the original LDraw and LEdit interface.
* '''[[LEGO Digital Designer]]''': Limited conversion between LDraw and LDD formats is [[LDraw to LDD conversion|possible]].
* [http://olson.pair.com/brickdraw3d/ '''BrickDraw3D''']: Features drag-and-drop part insertion and movement.

This editor no longer seems to be available:

* [http://homepage.mac.com/aallan/mbc.html '''Mac Brick CAD''']: Multiple versions of this editor are available. [http://homepage.mac.com/aallan/faq.html#1]

== Viewers ==

These programs are primarily intended to view existing LDraw models.

* '''[[LDView]]''': Robust viewer with fly-through mode, automatic part downloading, and numerous rendering options.
* [http://www.hassings.dk/l3/l3lab.html '''L3Lab''']: Viewer with many useful options including an "exploded" view.
* [http://www.magnusviri.com/lego/downloads/lcx.html '''LCX''']: Experimental viewer with BFC tools and a rudimentary text-based editor.

== Instructions ==

Create step-by-step instructions to show others how to build your models.

* [http://www.kclague.net/LPub4.htm '''LPub''']: Page layout program to create building instructions for LDraw models.

== Utilities ==

Most of these utilities are command line programs, so some familiarity with the [http://en.wikipedia.org/wiki/Terminal_(application) Terminal] is needed to use them.

* [http://lego.bldesign.org/LSculpt/ '''LSculpt''']: Generate "studs-out" LDraw surfaces from arbitrary 3D models.
* [http://bricksmith.sourceforge.net/LSynth.html '''LSynth'''] and [http://anoved.net/2007/04/lsynth-service.html '''LSynth Service''']: Synthesize flexible elements like hoses and chains. [http://www.kclague.net/LSynth/]
* [http://www.hassings.dk/l3/l3p.html '''L3P'''] and [http://www.magnusviri.com/lego/downloads/l3p.html '''L3P Launcher''']: Convert LDraw files to [http://www.povray.org/ POV-Ray] format for high-quality rendering. [http://www.el-lutzo.de/lego/lgeo.html LGEO] parts can be substituted. [http://www.hassings.dk/l3/lgeofix.html]
* [http://anoved.net/2007/10/prel3p.html '''PreL3P''']: Convert newer color codes to a format understood by L3P.
* [http://www.br-eng.info/my-lego-roscomenu-29/my-ldraw-roscomenu-45/17-my-ldraw/50-txt2dat '''txt2dat''']: Generate textual LDraw stickers.
* [http://www.philohome.com/isecalc/isecalc0.htm '''Isecalc''']: Compute part intersections.
* [http://www.philohome.com/isecalc/linetrim.htm '''Linetrim''']: Clip lines against surfaces.
* [http://www.philohome.com/isecalc/planarcheck.htm '''Planarcheck''']: Test quadrilateral coplanarity.
* [http://www.philohome.com/isecalc/coverer.htm '''Coverer''']: Generate a sheet of triangles and quads between lines.
* [http://www.philohome.com/isecalc/ytruder.htm '''Ytruder''']: Another way to generate a sheet of triangles and quads.
* [http://anoved.net/tw_ldraw_kit.html '''TextWrangler LDraw Kit'''] and [http://anoved.net/tw_ldraw_kit.html#ldlocate '''ldlocate''']: Improve TextWrangler's ability to edit LDraw files.
* [http://folk.uio.no/fredrigl/technic/ldraw-mode/ '''LDraw-mode for Emacs''']: Adds functionality for working with LDraw files to the Emacs editor. [http://folk.uio.no/fredrigl/technic/ldraw-mode/install-linux.html]
* [http://anoved.net/files/img2sticker-install.zip '''img2sticker''']: Convert images to optimized LDraw stickers. [http://news.lugnet.com/cad/?n=13017]
* [http://anoved.net/2007/10/ldmerge.html '''LDMerge''']: Merge and un-merge separate LDraw part libraries.
* [http://anoved.net/2007/11/ldraw-part-search-services.html '''Part Search Services''']: Look up selected part information in popular databases.
* [http://www.levork.org/l2rib.html '''l2rib''']: Convert LDraw models to RenderMan format.
* [http://anoved.net/2008/05/ldtrim.html '''LDTrim''']: Reformat LDraw code for clarity and consistency.

== Web ==

Although not strictly Macintosh oriented, [[Web-based Applications|web based]] LDraw tools are accessible to Mac users.

[[Category:Mac]]
[[Category:Software]]

Macintosh-Compatible LDraw Software

2010-04-09T16:21:43Z

Arezey: /* Viewers */

This is an inventory of Macintosh compatible LDraw software. Everyone is encouraged to contribute updates, clarifications, and corrections to this page. The objective is to compile and maintain a definitive list of the tools Mac users have at their disposal to work with the LDraw system.

== Editors ==

These programs can be used to create LDraw models.

* '''[[Bricksmith]]''': Arguably the premier Macintosh LDraw editor. Features a minifig editor, mouse-based part movement (as well as keyboard controls), and a searchable part browser.
* [http://ldglite.sourceforge.net/ '''ldglite''']: Keyboard oriented editor with numerous options. Faithful to the original LDraw and LEdit interface.
* '''[[LEGO Digital Designer]]''': Limited translation between LDraw and [[LDD]] format is [[LDraw to LDD conversion|possible]].
* [http://olson.pair.com/brickdraw3d/ '''BrickDraw3D''']: Features drag-and-drop part insertion and movement.

This editor no longer seems to be available:

* [http://homepage.mac.com/aallan/mbc.html '''Mac Brick CAD''']: Multiple versions of this editor are available. [http://homepage.mac.com/aallan/faq.html#1]

== Viewers ==

These programs are primarily intended to view existing LDraw models.

* '''[[LDView]]''': Robust viewer with fly-through mode, automatic part downloading, and numerous rendering options.
* [http://www.hassings.dk/l3/l3lab.html '''L3Lab''']: Viewer with many useful options including an "exploded" view.
* [http://www.magnusviri.com/lego/downloads/lcx.html '''LCX''']: Experimental viewer with BFC tools and a rudimentary text-based editor.

== Instructions ==

Create step-by-step instructions to show others how to build your models.

* [http://www.kclague.net/LPub4.htm '''LPub''']: Page layout program to create building instructions for LDraw models.

== Utilities ==

Most of these utilities are command line programs, so some familiarity with the [http://en.wikipedia.org/wiki/Terminal_(application) Terminal] is needed to use them.

* [http://lego.bldesign.org/LSculpt/ '''LSculpt''']: Generate "studs-out" LDraw surfaces from arbitrary 3D models.
* [http://bricksmith.sourceforge.net/LSynth.html '''LSynth'''] and [http://anoved.net/2007/04/lsynth-service.html '''LSynth Service''']: Synthesize flexible elements like hoses and chains. [http://www.kclague.net/LSynth/]
* [http://www.hassings.dk/l3/l3p.html '''L3P'''] and [http://www.magnusviri.com/lego/downloads/l3p.html '''L3P Launcher''']: Convert LDraw files to [http://www.povray.org/ POV-Ray] format for high-quality rendering. [http://www.el-lutzo.de/lego/lgeo.html LGEO] parts can be substituted. [http://www.hassings.dk/l3/lgeofix.html]
* [http://anoved.net/2007/10/prel3p.html '''PreL3P''']: Convert newer color codes to a format understood by L3P.
* [http://www.br-eng.info/my-lego-roscomenu-29/my-ldraw-roscomenu-45/17-my-ldraw/50-txt2dat '''txt2dat''']: Generate textual LDraw stickers.
* [http://www.philohome.com/isecalc/isecalc0.htm '''Isecalc''']: Compute part intersections.
* [http://www.philohome.com/isecalc/linetrim.htm '''Linetrim''']: Clip lines against surfaces.
* [http://www.philohome.com/isecalc/planarcheck.htm '''Planarcheck''']: Test quadrilateral coplanarity.
* [http://www.philohome.com/isecalc/coverer.htm '''Coverer''']: Generate a sheet of triangles and quads between lines.
* [http://www.philohome.com/isecalc/ytruder.htm '''Ytruder''']: Another way to generate a sheet of triangles and quads.
* [http://anoved.net/tw_ldraw_kit.html '''TextWrangler LDraw Kit'''] and [http://anoved.net/tw_ldraw_kit.html#ldlocate '''ldlocate''']: Improve TextWrangler's ability to edit LDraw files.
* [http://folk.uio.no/fredrigl/technic/ldraw-mode/ '''LDraw-mode for Emacs''']: Adds functionality for working with LDraw files to the Emacs editor. [http://folk.uio.no/fredrigl/technic/ldraw-mode/install-linux.html]
* [http://anoved.net/files/img2sticker-install.zip '''img2sticker''']: Convert images to optimized LDraw stickers. [http://news.lugnet.com/cad/?n=13017]
* [http://anoved.net/2007/10/ldmerge.html '''LDMerge''']: Merge and un-merge separate LDraw part libraries.
* [http://anoved.net/2007/11/ldraw-part-search-services.html '''Part Search Services''']: Look up selected part information in popular databases.
* [http://www.levork.org/l2rib.html '''l2rib''']: Convert LDraw models to RenderMan format.
* [http://anoved.net/2008/05/ldtrim.html '''LDTrim''']: Reformat LDraw code for clarity and consistency.

== Web ==

Although not strictly Macintosh oriented, [[Web-based Applications|web based]] LDraw tools are accessible to Mac users.

[[Category:Mac]]
[[Category:Software]]

Macintosh-Compatible LDraw Software

2010-04-09T16:21:23Z

Arezey: /* Viewers */

This is an inventory of Macintosh compatible LDraw software. Everyone is encouraged to contribute updates, clarifications, and corrections to this page. The objective is to compile and maintain a definitive list of the tools Mac users have at their disposal to work with the LDraw system.

== Editors ==

These programs can be used to create LDraw models.

* '''[[Bricksmith]]''': Arguably the premier Macintosh LDraw editor. Features a minifig editor, mouse-based part movement (as well as keyboard controls), and a searchable part browser.
* [http://ldglite.sourceforge.net/ '''ldglite''']: Keyboard oriented editor with numerous options. Faithful to the original LDraw and LEdit interface.
* '''[[LEGO Digital Designer]]''': Limited translation between LDraw and [[LDD]] format is [[LDraw to LDD conversion|possible]].
* [http://olson.pair.com/brickdraw3d/ '''BrickDraw3D''']: Features drag-and-drop part insertion and movement.

This editor no longer seems to be available:

* [http://homepage.mac.com/aallan/mbc.html '''Mac Brick CAD''']: Multiple versions of this editor are available. [http://homepage.mac.com/aallan/faq.html#1]

== Viewers ==

These programs are primarily intended to view existing LDraw models.

* '''[[LDView]]''': Robust viewer with fly-through mode, automatic part downloading, and numerous rendering options.
* [http://www.hassings.dk/l3/l3lab.html '''L3Lab''']: Viewer with many useful options including an "exploded" view.
* [http://www.magnusviri.com/lego/downloads/lcx.html '''LCX''']: Experimental viewer with [[BFC]] tools and a rudimentary text-based editor.

== Instructions ==

Create step-by-step instructions to show others how to build your models.

* [http://www.kclague.net/LPub4.htm '''LPub''']: Page layout program to create building instructions for LDraw models.

== Utilities ==

Most of these utilities are command line programs, so some familiarity with the [http://en.wikipedia.org/wiki/Terminal_(application) Terminal] is needed to use them.

* [http://lego.bldesign.org/LSculpt/ '''LSculpt''']: Generate "studs-out" LDraw surfaces from arbitrary 3D models.
* [http://bricksmith.sourceforge.net/LSynth.html '''LSynth'''] and [http://anoved.net/2007/04/lsynth-service.html '''LSynth Service''']: Synthesize flexible elements like hoses and chains. [http://www.kclague.net/LSynth/]
* [http://www.hassings.dk/l3/l3p.html '''L3P'''] and [http://www.magnusviri.com/lego/downloads/l3p.html '''L3P Launcher''']: Convert LDraw files to [http://www.povray.org/ POV-Ray] format for high-quality rendering. [http://www.el-lutzo.de/lego/lgeo.html LGEO] parts can be substituted. [http://www.hassings.dk/l3/lgeofix.html]
* [http://anoved.net/2007/10/prel3p.html '''PreL3P''']: Convert newer color codes to a format understood by L3P.
* [http://www.br-eng.info/my-lego-roscomenu-29/my-ldraw-roscomenu-45/17-my-ldraw/50-txt2dat '''txt2dat''']: Generate textual LDraw stickers.
* [http://www.philohome.com/isecalc/isecalc0.htm '''Isecalc''']: Compute part intersections.
* [http://www.philohome.com/isecalc/linetrim.htm '''Linetrim''']: Clip lines against surfaces.
* [http://www.philohome.com/isecalc/planarcheck.htm '''Planarcheck''']: Test quadrilateral coplanarity.
* [http://www.philohome.com/isecalc/coverer.htm '''Coverer''']: Generate a sheet of triangles and quads between lines.
* [http://www.philohome.com/isecalc/ytruder.htm '''Ytruder''']: Another way to generate a sheet of triangles and quads.
* [http://anoved.net/tw_ldraw_kit.html '''TextWrangler LDraw Kit'''] and [http://anoved.net/tw_ldraw_kit.html#ldlocate '''ldlocate''']: Improve TextWrangler's ability to edit LDraw files.
* [http://folk.uio.no/fredrigl/technic/ldraw-mode/ '''LDraw-mode for Emacs''']: Adds functionality for working with LDraw files to the Emacs editor. [http://folk.uio.no/fredrigl/technic/ldraw-mode/install-linux.html]
* [http://anoved.net/files/img2sticker-install.zip '''img2sticker''']: Convert images to optimized LDraw stickers. [http://news.lugnet.com/cad/?n=13017]
* [http://anoved.net/2007/10/ldmerge.html '''LDMerge''']: Merge and un-merge separate LDraw part libraries.
* [http://anoved.net/2007/11/ldraw-part-search-services.html '''Part Search Services''']: Look up selected part information in popular databases.
* [http://www.levork.org/l2rib.html '''l2rib''']: Convert LDraw models to RenderMan format.
* [http://anoved.net/2008/05/ldtrim.html '''LDTrim''']: Reformat LDraw code for clarity and consistency.

== Web ==

Although not strictly Macintosh oriented, [[Web-based Applications|web based]] LDraw tools are accessible to Mac users.

[[Category:Mac]]
[[Category:Software]]

Macintosh-Compatible LDraw Software

2010-04-09T16:21:02Z

Arezey: /* Editors */

This is an inventory of Macintosh compatible LDraw software. Everyone is encouraged to contribute updates, clarifications, and corrections to this page. The objective is to compile and maintain a definitive list of the tools Mac users have at their disposal to work with the LDraw system.

== Editors ==

These programs can be used to create LDraw models.

* '''[[Bricksmith]]''': Arguably the premier Macintosh LDraw editor. Features a minifig editor, mouse-based part movement (as well as keyboard controls), and a searchable part browser.
* [http://ldglite.sourceforge.net/ '''ldglite''']: Keyboard oriented editor with numerous options. Faithful to the original LDraw and LEdit interface.
* '''[[LEGO Digital Designer]]''': Limited translation between LDraw and [[LDD]] format is [[LDraw to LDD conversion|possible]].
* [http://olson.pair.com/brickdraw3d/ '''BrickDraw3D''']: Features drag-and-drop part insertion and movement.

This editor no longer seems to be available:

* [http://homepage.mac.com/aallan/mbc.html '''Mac Brick CAD''']: Multiple versions of this editor are available. [http://homepage.mac.com/aallan/faq.html#1]

== Viewers ==

These programs are primarily intended to view existing LDraw models.

* [http://ldview.sourceforge.net/ '''LDView''']: Robust viewer with fly-through mode, automatic part downloading, and numerous rendering options.
* [http://www.hassings.dk/l3/l3lab.html '''L3Lab''']: Viewer with many useful options including an "exploded" view.
* [http://www.magnusviri.com/lego/downloads/lcx.html '''LCX''']: Experimental viewer with [[BFC]] tools and a rudimentary text-based editor.

== Instructions ==

Create step-by-step instructions to show others how to build your models.

* [http://www.kclague.net/LPub4.htm '''LPub''']: Page layout program to create building instructions for LDraw models.

== Utilities ==

Most of these utilities are command line programs, so some familiarity with the [http://en.wikipedia.org/wiki/Terminal_(application) Terminal] is needed to use them.

* [http://lego.bldesign.org/LSculpt/ '''LSculpt''']: Generate "studs-out" LDraw surfaces from arbitrary 3D models.
* [http://bricksmith.sourceforge.net/LSynth.html '''LSynth'''] and [http://anoved.net/2007/04/lsynth-service.html '''LSynth Service''']: Synthesize flexible elements like hoses and chains. [http://www.kclague.net/LSynth/]
* [http://www.hassings.dk/l3/l3p.html '''L3P'''] and [http://www.magnusviri.com/lego/downloads/l3p.html '''L3P Launcher''']: Convert LDraw files to [http://www.povray.org/ POV-Ray] format for high-quality rendering. [http://www.el-lutzo.de/lego/lgeo.html LGEO] parts can be substituted. [http://www.hassings.dk/l3/lgeofix.html]
* [http://anoved.net/2007/10/prel3p.html '''PreL3P''']: Convert newer color codes to a format understood by L3P.
* [http://www.br-eng.info/my-lego-roscomenu-29/my-ldraw-roscomenu-45/17-my-ldraw/50-txt2dat '''txt2dat''']: Generate textual LDraw stickers.
* [http://www.philohome.com/isecalc/isecalc0.htm '''Isecalc''']: Compute part intersections.
* [http://www.philohome.com/isecalc/linetrim.htm '''Linetrim''']: Clip lines against surfaces.
* [http://www.philohome.com/isecalc/planarcheck.htm '''Planarcheck''']: Test quadrilateral coplanarity.
* [http://www.philohome.com/isecalc/coverer.htm '''Coverer''']: Generate a sheet of triangles and quads between lines.
* [http://www.philohome.com/isecalc/ytruder.htm '''Ytruder''']: Another way to generate a sheet of triangles and quads.
* [http://anoved.net/tw_ldraw_kit.html '''TextWrangler LDraw Kit'''] and [http://anoved.net/tw_ldraw_kit.html#ldlocate '''ldlocate''']: Improve TextWrangler's ability to edit LDraw files.
* [http://folk.uio.no/fredrigl/technic/ldraw-mode/ '''LDraw-mode for Emacs''']: Adds functionality for working with LDraw files to the Emacs editor. [http://folk.uio.no/fredrigl/technic/ldraw-mode/install-linux.html]
* [http://anoved.net/files/img2sticker-install.zip '''img2sticker''']: Convert images to optimized LDraw stickers. [http://news.lugnet.com/cad/?n=13017]
* [http://anoved.net/2007/10/ldmerge.html '''LDMerge''']: Merge and un-merge separate LDraw part libraries.
* [http://anoved.net/2007/11/ldraw-part-search-services.html '''Part Search Services''']: Look up selected part information in popular databases.
* [http://www.levork.org/l2rib.html '''l2rib''']: Convert LDraw models to RenderMan format.
* [http://anoved.net/2008/05/ldtrim.html '''LDTrim''']: Reformat LDraw code for clarity and consistency.

== Web ==

Although not strictly Macintosh oriented, [[Web-based Applications|web based]] LDraw tools are accessible to Mac users.

[[Category:Mac]]
[[Category:Software]]

Parts Tracker

2010-04-09T16:20:06Z

Arezey:

{{Software
|developer=Steve Bliss, Chris Dee
|function=Official library management, various
|version=None
|platform=Web - fixed on the Peeron server
|website=[http://www.ldraw.org/library/tracker/ ldraw.org/library/tracker]
}}

The '''Parts Tracker''' is the site of certification of new and updated parts to the official [[LDraw]] parts library.

==Certification process==
The parts tracker is where all new and updated parts go to before entering the library. There, the parts go through a certification process. Reviewers go through parts, do various quality checks and give their vote based on their findings. There are three kinds of votes reviewers may post:
*'''{{c|#880|novote}}''': Indifferent - neither certifies nor holds. Typically used to give comments, point out suggestions or to cancel previous votes.
*'''{{c|#080|certify}}''': The yes vote - two of these plus admin certify is required for a part to get released.
*'''{{c|#800|hold}}''': Acts as every reviewer's veto. It is given when errors are spotted that must be fixed before the part can be released in the official library.

In order for a part to be released into the official library, the following criteria must be met:
*the part must have two certify-votes given by normal reviewers and one certify-vote given by a parts tracker administrator.
*all subfiles the part references must be certified.
*no hold vote may be present, not in the part nor in the subfile tree.
Primitives or subfiles are not released in the official library if it is not referenced by any certified part.

The hold vote is very powerful as it prevents the release of any part. Because of such, it typically is only used if the reviewer sees that the part may not be released until the error is fixed. Hold votes may be canceled by the reviewer by them changing their vote to novote or certify. Also, the parts tracker administrator is able to overturn hold votes but only does so in extreme cases. Different reviewers have different holding thresholds, some use novote to point out a dubious issue, whereas others give hold votes on a similar issue.

When a part is submitted to the parts tracker, the author has a type of protection over his part - other people are not to submit new versions of the part without the author's permission. However, parts that have been held for three months without message from the part author are open for anybody to fix and modify. The rule is occasionally, albeit rarely, flouted by parts tracker administrators in order to carry out necessary action to further the certification. These changes are typically origin and orientation changes and positioning fixes in composite parts.

Part authors without reviewer rights can submit novote "reviews" to their own parts. This can be used to submit comments if originally forgotten out or to respond to reviews.

The parts tracker also has a number of functions for the administrators, including a part renumbering function, admin editing function, a deleting function and the release function.

==Status codes==
Files on the parts tracker have a status code shown in their detail page or usually in any links to them. These codes are composed with:
*one '''A''' per admin certify
*one '''C''' per reviewer certify
*one '''S''' per uncertified subfile within first branch
*one '''H''' per hold vote

The codes end with '''X''' or '''F''', the former meaning a new file and the latter meaning a fix to an official file.

==Right levels==
There are three types of rights existing:
*'''Submitter rights''': Allows the user to submit parts to the parts tracker and to post novote reviews to own parts.
*'''Reviewer rights''': Allows the user to post reviews to parts.
*'''Administrator rights''': The parts tracker administrators are Chris Dee and Steve Bliss.

Submitter and reviewer rights are given to users by the parts tracker administrators.

==Other functions==
The parts tracker contains a range of tools, some of which are interfaces to other tools such as l3p, some are functions that operate on the tracker, some are general tools unique to the parts tracker.

*'''Activity Log''': Displays a log of recent activity - useful for keeping an eye on latest updates.
*'''Parts List''': Displays a list of all parts on the tracker sorted on the certification status and part title.
*'''File Scan''': Scans the tracker's parts for the content given and displays the list of parts that match.
*'''Patterned Part Summary''': Shows lists of patterned versions modeled to parts. Also has an akin function for composites.
*'''Subfile Tree View''': shows subfile trees of parts.
*'''File Check''': Runs the part given through l3p and does some extra checks to it.
*'''File Queue''': Displays a list of all parts on the tracker sorted on the timestamp of the last action to it.
*'''DAT Diff''': Generates a diff of two files.
*'''History''': A bar graph of the parts tracker history.

The parts tracker also hosts a number of reference files written and maintained by the administrators. These contain FAQs, information files and even the laundry list of the parts tracker application itself.

==Trivia==
*The current parts tracker had one predecessor.

==Links==
*[http://www.ldraw.org/library/tracker/ The parts tracker main page]
*[http://www.ldraw.org/cgi-bin/tracker/activity.cgi The Activity Log]
[[Category:LDraw.org]]

LDraw Files Requirements

2010-04-09T14:11:20Z

Arezey:

Parts made for the [[LDraw]] parts library are bound to certain '''technical restrictions'''. These restrictions may confuse newbie part authors and thus they are listed here, along with the methods of taking care of them. Taking care of these restrictions will also give more probability for fast certification at the [[Parts Tracker|parts tracker]].

These issues are checked for and typically corrected by the [[DATHeader]] tool.

==Issue types==
===Filename and title length===
Filenames of parts are to be no longer than twenty-five characters, including the .dat-extension. This restriction was eight characters plus the .dat-extension (DOS filename length), but was recently extended. Titles of parts are to be no longer than sixty-four characters in length.

[[Image:ComplexityExample.png|thumb|right|Example of complexity. The quadrilateral on the left is simple as it is meant to be. The one on the right is complex as it intersects itself.]]
===Complex quadrilaterals===
'''Complexity''' means that the internal facet lines of quadrilaterals intersect themselves. They are also nicknamed as "'''bowtie quadrilaterals'''" on the parts tracker. They are corrected by changing the order of the vertices, making it simple again. Complexity is not an issue for triangles as they, having only three vertices, are unable to intersect themselves.

[[Image:ConcavityExample.png|thumb|left|Example of concavity. The quadrilateral on the left is clearly concave. The right shape is the same quadrilateral split into two triangles.]]
===Concavity===
'''Concavity''' means that an internal angle of a quadrilateral is greater than 179.9 degrees or smaller than 0.025 degrees, as taken from the official specifications. The fix for concavity is to split them into two triangles. Triangles, having only three vertices, are always convex.

===Non-co-planarity===
'''Non-co-planarity''' means that all vertices of a quadrilateral do not reside in the same plane. Quadrilaterals like this, that have one point outside the plane, are also nicknamed as "'''warped quads'''" on the parts tracker. These quadrilaterals are typically present in curved shapes. Non-co-planar quadrilaterals are tolerated up to three degrees, with one degree limit being "ideal", especially for large quadrilaterals. The fix to these quadrilaterals is to split them into two triangles. Triangles, having only three vertices, are always co-planar.

===Collinearity===
[[Image:CollinearityExample.png|thumb|right|Example of collinearity. The polygon shown is actually a quadrilateral with three vertices residing in a straight line.]]
'''Collinearity''' means that three or more vertices of a polygon reside in the same straight line. Polygons like this are also nicknamed as "'''degenerated''' or '''deformed polygons'''" on the parts tracker.

These are dealt with case-by-case basis. Collinear triangles, being only lines, are typically deleted, while quadrilaterals are either turned into triangles by deleting the middle vertex within the line (if three within same line) or deleting it entirely (if all four). '''However''', needle polygons like this can be troublesome as their lengthy facet lines might warp a little bit after reforming, causing gaps, so care should be taken when correcting these.

===Duplicates===
Two or more copies of the same, '''identical''' polygon or subfile may not exist within the file. They are typically easy to fix by just deleting the duplicate in question.

===Overlapping and intersecting===
The exact rules for '''overlapping''' may be confusing. According to the official specifications:
<pre>All or part of a line (line type 2) may not overlap all or part of any other line (line type 2).

All or part of a conditional line (line type 5) may not overlap all or part of any other conditional line (line type 5).

Part (but not all) of a conditional line (line type 5) may overlap all (but not part) of a line (line type 2).
Consider the line A-B-C-D
If AB and CD need to be conditional lines and BC a line, it is acceptable to define this as a line BC and a single
conditional line AD
If AC needs to be a line and just CD needs to be a conditional line, it is not acceptable to define the conditional
line as either AD or BD
If AD is a line, there are no valid conditional lines along the length of AD

Lines (line type 2 or 5) may intersect any other line (line type 2 or 5).

Every effort must be made to remove overlapping co-planar polygons (line type 3 or 4). Where overlapping polygons are
unavoidable, the overlap must be kept to the absolute minimum.

Every effort must be made to remove intersecting (non co-planar) polygons (line type 3 or 4). Where intersecting
polygons are unavoidable, the intersection(s) must be kept to the absolute minimum.

Note: Primitives that overlap/intersect other primitives or polygons (line type 3 or 4), provided that the overlap
is small, are considered acceptable. The intention is not to force part authors to in-line primitives. However, there
may be some cases where it is better to use (say) a 3-8cyli and a quad than a 1-2cyli; case-by-case decisions are left
to the parts review process.</pre>

However, these rules are often flouted in the interests of saving disk space and for convenience of the part authors. Polygons and primitives typically bleed into the interiors of parts as the interiors are not seen by the end user. However, polygons of different colours may not overlap each other and every effort should be taken to remove overlaps and bleed-ins when the part in question is sold by LEGO in transparent colours.

===Matrix rule===
Matrices of subpart references may not contain rows or columns all zero. Say, an edge circle of:
<pre>1 16 0 0 0 1 0 0 0 1 0 0 0 1</pre>
is considered valid, but:
<pre>1 16 0 0 0 1 0 0 0 0 0 0 0 1</pre>
has the Y-row (middle row) all zero. Also, seen the other way, the second line has the middle column all zero (all middle numbers are zero).

===Colour restrictions===
Polygons may not use the edge colour #24, nor can lines use main colour #16. In the past lines using main colour were used for:
*where a line is being used for fine detail within a pattern and that pattern is re-used within many parts (and hence sub-parted) in different colours (for example, sub-part s/973p11a.dat)
*when a sub-part pattern leaves a narrow gap of base-part colour around the pattern (for example, see sub-part s/973p11b.dat)
(as taken from official specs). However, gaps are these days not really tolerated and fine details is no longer marked with lines.

All colours, except for pattern colours, must be present within [[LDConfig.ldr]]

Also polygons should always be of colour 16 unless a printed pattern is in question. This is not mentioned in official specifications but is enforced on the parts tracker.

===Header specifications===
The header is these days formalized and should be formatted in new parts. While not typically enforced by hold votes on the parts tracker, it is of good manner to format the header when submitting parts to cut down the work the tracker administrator needs to do. The [[DATHeader]] tool was made for automatic header formatting in the first place and does this job well.

===Line termination===
All lines are to be terminated with a <nowiki><CR><LF></nowiki>-sequence, i.e. the DOS line ending. The last two bytes of part files are to be the DOS line ending as well.

[[Category:LDraw.org]]

File:CollinearityExample.png

2010-04-09T14:08:52Z

Arezey:

File:ConcavityExample.png

2010-04-09T13:20:19Z

Arezey:

File:ComplexityExample.png

2010-04-09T13:19:50Z

Arezey:

Track Designer

2010-03-29T22:59:59Z

Arezey:

{{Software
|developer=Matthew Bates
|function=Train layouts
|version=2.0
|platform=Windows
|website=[http://www.ngltc.org/train_depot/td.htm ngltc.org/train_depot/td.htm]
}}

'''Track Designer''' is a program for doing train layouts. It is not LDraw compatible, but is widely used, although [[BlueBrick]], an LDraw compatible, a newer program, has partly supplanted it.

==External links==
[http://www.ngltc.org/train_depot/td.htm Track Designer] page at the NGLTC site.

{{stub}}

Bricksmith

2010-03-25T21:57:23Z

Arezey:

{{Software
|developer=Allen Smith
|function=CAD
|version=2.3.1
|platform=Mac
|website=[http://bricksmith.sourceforge.net bricksmith.sf.net]
}}
{{Stub}}

'''Bricksmith''' is an [[LDraw]] CAD program created by Allen Smith for Mac OS X.

==Links==

[http://bricksmith.sourceforge.net/ Bricksmith web site on SourceForge]

[[Category:Software]]
[[Category:Mac]]

Category:Needs Work

2010-03-25T21:55:57Z

Arezey:

[[Image:Toolbox.png|left]]
This page lists all articles that need work. Entries that are prefixed with ''Talk:'' have been given a Needs Work and those that are not are labeled as stubs. Note that [[Templates]] is not a true maintenance page - the template is only there for display purposes.

LEdit

2010-03-25T21:54:26Z

Arezey:

{{Software
|developer=James Jessiman
|function=Editing
|version=
|platform=DOS
|website=
}}
{{Stub}}

'''LDraw''' was the original editing program of [[LDraw]], created by the late James Jessiman.