View source for Custom LDraw File Syntax Additions

The following is a list currently known META Commands.  These commands are documented and maintained by the owner of their respective programs.  The URLs listed are the last known good links to that product.  This list is not all inclusive and should not be construed as a limitation but merely tool for programmer to use to prevent META command overlap.


===MLCad===
[[http://mlcad.lm-software.com]]

<code> ROTSTEP (&lt;x-angle&gt; &lt;y-angle&gt; &lt;z-angle&gt; [(REL| ADD | ABS)] | END)</code>

<code> BACKGROUND &lt;filename&gt;</code>

<code> BUFEXCHG (A-H) (STORE | RETRIEVE)</code>

<code> GHOST &lt;LDRAW line&gt;</code>

<code> GROUP &lt;n> &lt;name&gt;</code>

<code> MLCAD BGT &lt;group name&gt;</code>

<code> MLCAD SKIP_BEGIN</code>

<code> MLCAD SKIP_END</code>

<code> ROTATION CENTER &lt;x&gt; &lt;y&gt; &lt;z&gt; "&lt;name&gt;"</code>

<code> ROTATION CONFIG &lt;Rotation ID&gt; &lt;Visible Flag&gt;</code>

<code> ROTATION AXLE</code>

<code> MLCAD SPRING</code>

<code> MLCAD FLEXHOSE</code>

<code> MLCAD RUBBER_BELT</code>

===LPub===
(<a href="http://www.kclague.net/LPub/index.htm">http://www.kclague.net/LPub/index.htm</a>)

<code>[LPub Statements]</code>

<code> LPUB PLI BEGIN SUB=LPUB PLI BEGIN SUB</code>

<code> LPUB PLI BEGIN IGN=LPUB PLI BEGIN IGN</code>

<code> LPUB END=PLIST END</code>

<code> -=-</code>

<code> BI BEGIN GRAYED=BI BEGIN GRAYED</code>

<code> BI END=BI END</code>

<code> LPUB GROUP REMOVE=LPUB GROUP REMOVE</code>

<code> </code>

<code> [LPub Page Statements]</code>

<code> SIZE=LPUB PAGE SIZE</code>

<code> PLI (YES|NO)=LPUB PAGE PLI (YES|NO)</code>

<code> -=-</code>

<code> BACKGROUND TRANS=LPUB PAGE BACKGROUND TRANS</code>

<code> BACKGROUND color=LPUB PAGE BACKGROUND color</code>

<code> BACKGROUND [STRETCH] png_image_name=LPUB PAGE BACKGROUND [STRETCH]</code>

<code> png_image_name</code>

<code> -=-</code>

<code> BORDER SQUARE=LPUB PAGE BORDER SQUARE</code>

<code> BORDER ROUND=LPUB PAGE BORDER ROUND</code>

<code> BORDER MARGINS x_margin y_margin=LPUB PAGE BORDER MARGINS x_margin y_margin</code>

<code> -=-</code>

<code> NUMBER MARGINS x_margin y_margin=LPUB PAGE NUMBER MARGINS x_margin y_margin</code>

<code> </code>

<code> [LPub Assembly Statements]</code>

<code> MARGINS x_margin y_margin=LPUB ASSEM MARGINS x_margin y_margin</code>

<code> -=-</code>

<code> PLACEMENT corner PAGE=LPUB ASSEM PLACEMENT corner PAGE</code>

<code> PLACEMENT edge PAGE=LPUB ASSEM PLACEMENT edge PAGE</code>

<code> PLACEMENT CENTER PAGE=LPUB ASSEM PLACEMENT CENTER PAGE</code>

<code> PLACEMENT OFFSET x_offset y_offset=LPUB ASSEM PLACEMENT OFFSET x_offset</code>

<code> y_offset</code>

<code> </code>

<code> [LPub PLI Layout Statements]</code>

<code> PART MARGINS x y=LPUB PLI PART MARGINS x y</code>

<code> MARGINS x y=LPUB PLI MARGINS x y</code>

<code> -=-</code>

<code> PLACEMENT CENTER PAGE=LPUB PLI PLACEMENT CENTER PAGE</code>

<code> PLACEMENT edge PAGE=LPUB PLI PLACEMENT edge PAGE</code>

<code> PLACEMENT CENTER ASSEM INSIDE=LPUB PLI PLACEMENT CENTER ASSEM INSIDE</code>

<code> PLACEMENT corner ASSEM INSIDE=LPUB PLI PLACEMENT corner ASSEM INSIDE</code>

<code> PLACEMENT edge ASSEM INSIDE=LPUB PLI PLACEMENT edge ASSEM INSIDE</code>

<code> PLACEMENT corner ASSEM OUTSIDE=LPUB PLI PLACEMENT corner ASSEM OUTSIDE</code>

<code> PLACEMENT edge justification ASSEM OUTSIDE=LPUB PLI PLACEMENT edge</code>

<code> justification ASSEM OUTSIDE</code>

<code> PLACEMENT OFFSET x_offset y_offset=LPUB PLI PLACEMENT OFFSET x_offset</code>

<code> y_offset</code>

<code> -=-</code>

<code> BORDER SQUARE color thickness=LPUB PLI BORDER SQUARE color thickness</code>

<code> BORDER ROUND color thickness radius=LPUB PLI BORDER ROUND color</code>

<code> thickness radius</code>

<code> BORDERLESS=LPUB PLI BORDERLESS</code>

<code> BORDER MARGINS x y=LPUB PLI BORDER MARGINS x y</code>

<code> -=-</code>

<code> BACKGROUND TRANS=LPUB PLI BACKGROUND TRANS</code>

<code> BACKGROUND color=LPUB PLI BACKGROUND color</code>

<code> BACKGROUND [STRETCH] fname=LPUB PLI BACKGROUND [STRETCH] fname</code>

<code> -=-</code>

<code> CONSTRAIN AREA=LPUB PLI CONSTRAIN AREA</code>

<code> CONSTRAIN SQUARE=LPUB PLI CONSTRAIN SQUARE</code>

<code> CONSTRAIN WIDTH width=LPUB PLI CONSTRAIN WIDTH width</code>

<code> CONSTRAIN HEIGHT height=LPUB PLI CONSTRAIN HEIGHT height</code>

<code> CONSTRAIN COLS cols=LPUB PLI CONSTRAIN COLS cols</code>

<code> </code>

<code> [LPub Callout Statements]</code>

<code> MARGINS x y=LPUB CALLOUT MARGINS x y=</code>

<code> HORIZONTAL=LPUB CALLOUT HORIZONTAL</code>

<code> VERTICAL=LPUB CALLOUT VERTICAL</code>

<code> SEPARATOR seperator_color separator_width=LPUB CALLOUT SEPARATOR</code>

<code> seperator_color separator_width</code>

<code> -=-</code>

<code> BORDER SQUARE color thickness=LPUB CALLOUT BORDER SQUARE color thickness</code>

<code> BORDER ROUND color thickness radius=LPUB CALLOUT BORDER ROUND color</code>

<code> thickness radius</code>

<code> BORDER MARGINS x y=LPUB CALLOUT BORDER MARGINS x y</code>

<code> BORDERLESS=LPUB CALLOUT BORDERLESS</code>

<code> -=-</code>

<code> BACKGROUND TRANS=LPUB CALLOUT BACKGROUND TRANS</code>

<code> BACKGROUND color=LPUB CALLOUT BACKGROUND color</code>

<code> BACKGROUND [STRETCH] fname=LPUB CALLOUT BACKGROUND [STRETCH] fname</code>

<code> -=-</code>

<code> BEGIN=LPUB CALLOUT BEGIN=LPUB CALLOUT BEGIN=LPUB CALLOUT BEGIN</code>

<code> END=LPUB CALLOUT END=LPUB CALLOUT END=LPUB CALLOUT END</code>

<code> DIVIDER=LPUB CALLOUT DIVIDER</code>

<code> -=-</code>

<code> INSTANCE_COUNT MARGINS x y=LPUB CALLOUT INSTANCE_COUNT MARGINS x y</code>

<code> INSTANCE_COUNT PLACEMENT corner CALLOUT preposition=LPUB CALLOUT</code>

<code> INSTANCE_COUNT PLACEMENT corner CALLOUT preposition</code>

<code> INSTANCE_COUNT PLACEMENT edge CALLOUT INSIDE=LPUB CALLOUT INSTANCE_COUNT</code>

<code> PLACEMENT edge CALLOUT INSIDE</code>

<code> INSTANCE_COUNT PLACEMENT horiz justification CALLOUT OUTSIDE=LPUB</code>

<code> CALLOUT INSTANCE_COUNT PLACEMENT horiz justification CALLOUT OUTSIDE</code>

<code> INSTANCE_COUNT PLACEMENT vert justification CALLOUT OUTSIDE=LPUB CALLOUT</code>

<code> INSTANCE_COUNT PLACEMENT vert justification CALLOUT OUTSIDE</code>

<code> -=-</code>

<code> PLACEMENT CENTER PAGE=LPUB CALLOUT PLACEMENT CENTER PAGE</code>

<code> PLACEMENT corner PAGE=LPUB CALLOUT PLACEMENT corner PAGE</code>

<code> PLACEMENT edge PAGE=LPUB CALLOUT PLACEMENT edge PAGE</code>

<code> PLACEMENT CENTER ASSEM INSIDE=LPUB CALLOUT PLACEMENT CENTER ASSEM INSIDE</code>

<code> PLACEMENT corner ASSEM INSIDE=LPUB CALLOUT PLACEMENT corner ASSEM INSIDE</code>

<code> PLACEMENT edge ASSEM INSIDE=LPUB CALLOUT PLACEMENT edge ASSEM INSIDE</code>

<code> PLACEMENT corner ASSEM OUTSIDE=LPUB CALLOUT PLACEMENT corner ASSEM OUTSIDE</code>

<code> PLACEMENT edge justification ASSEM OUTSIDE=LPUB CALLOUT PLACEMENT edge</code>

<code> justification ASSEM OUTSIDE</code>

<code> PLACEMENT OFFSET x_offset y_offset=LPUB CALLOUT PLACEMENT OFFSET</code>

<code> x_offset y_offset</code>

<code> -=-</code>

<code> POINTER BASE base=LPUB CALLOUT POINTER BASE base</code>

<code> POINTER placement loc assem_x assem_y=</code>

<code> </code>

<code> [LPub Step Number Statements]</code>

<code> PLACEMENT CENTER PAGE=LPUB STEP_NUMBER PLACEMENT CENTER PAGE</code>

<code> PLACEMENT corner PAGE=LPUB STEP_NUMBER PLACEMENT corner PAGE</code>

<code> PLACEMENT edge PAGE=LPUB STEP_NUMBER PLACEMENT edge PAGE</code>

<code> PLACEMENT CENTER ASSEM INSIDE=LPUB STEP_NUMBER PLACEMENT CENTER ASSEM INSIDE</code>

<code> PLACEMENT corner ASSEM INSIDE=LPUB STEP_NUMBER PLACEMENT corner ASSEM INSIDE</code>

<code> PLACEMENT edge ASSEM INSIDE=LPUB STEP_NUMBER PLACEMENT edge ASSEM INSIDE</code>

<code> PLACEMENT corner PLI=LPUB STEP_NUMBER PLACEMENT corner PLI</code>

<code> PLACEMENT edge justification PLI=LPUB STEP_NUMBER PLACEMENT edge</code>

<code> justification PLI</code>

<code> PLACEMENT corner ASSEM OUTSIDE=LPUB STEP_NUMBER PLACEMENT corner ASSEM</code>

<code> OUTSIDE</code>

<code> PLACEMENT edge justification ASSEM OUTSIDE=LPUB STEP_NUMBER PLACEMENT</code>

<code> edge justification ASSEM OUTSIDE</code>

<code> </code>

<code> [LPub Multi-Step Number Statements]</code>

<code> VERTICAL=LPUB MULTI_STEP VERTICAL</code>

<code> HORIZONTAL=LPUB MULTI_STEP HORIZONTAL</code>

<code> MARGINS x y=LPUB MULTI_STEP MARGINS x y</code>

<code> SEPARATOR seperator_color separator_width=LPUB MULTI_STEP SEPARATOR</code>

<code> seperator_color separator_width</code>

<code> BEGIN=LPUB MULTI_STEP BEGIN</code>

<code> DIVIDER=LPUB MULTI_STEP DIVIDER</code>

<code> END=LPUB MULTI_STEP END</code>

<code> </code>

<code> [LPub Bill Of Material Statements]</code>

<code> PART MARGINS x y=LPUB BOM PART MARGINS x y</code>

<code> MARGINS x y=LPUB BOM MARGINS x y</code>

<code> BEGIN IGN=LPUB BOM BEGIN IGN</code>

<code> END=LPUB BOM END</code>

<code> -=-</code>

<code> BORDER SQUARE color thickness=LPUB BOM BORDER SQUARE color thickness</code>

<code> BORDER ROUND color thickness radius=LPUB BOM BORDER ROUND color</code>

<code> thickness radius</code>

<code> BORDERLESS=LPUB BOM BORDERLESS</code>

<code> BORDER MARGINS x y=LPUB BOM BORDER MARGINS x y</code>

<code> -=-</code>

<code> BACKGROUND TRANS=LPUB BOM BACKGROUND TRANS</code>

<code> BACKGROUND color=LPUB BOM BACKGROUND color</code>

<code> BACKGROUND [STRETCH] fname=LPUB BOM BACKGROUND [STRETCH] fname</code>

<code> -=-</code>

<code> CONSTRAIN AREA=LPUB BOM CONSTRAIN AREA</code>

<code> CONSTRAIN SQUARE=LPUB BOM CONSTRAIN SQUARE</code>

<code> CONSTRAIN WIDTH width=LPUB BOM CONSTRAIN WIDTH width</code>

<code> CONSTRAIN HEIGHT height=LPUB BOM CONSTRAIN HEIGHT height</code>

<code> CONSTRAIN COLS cols=LPUB BOM CONSTRAIN COLS cols</code>

<code> -=-</code>

<code> SORT WIDTH=LPUB BOM SORT WIDTH</code>

<code> PACK SUBS=LPUB BOM PACK SUBS</code>


===LSynth===
(<a href="http://www.kclague.net/LSynth/">http://www.kclague.net/LSynth/</a>)

<code>SYNTH BEGIN (RIBBED_TUBE |</code>

<code>             FLEXIBLE_TUBE |</code>

<code>             FLEX_CABLE |</code>

<code>             RIGID_TUBE |</code>

<code>             ELECTRIC_CABLE |</code>

<code>             PNEUMATIC_TUBE |</code>

<code>             FLEXIBLE_AXLE |</code>

<code>             FIBER_OPTIC_CABLE |</code>

<code>             RUBBER_BAND |</code>

<code>             CHAIN |</code>

<code>             PLASTIC_TREAD |</code>

<code>             RUBBER_TREAD)</code>
</pre>
<code> SYNTH END</code>

<code> SYNTH (INSIDE | OUTSIDE | CROSS | SHOW | HIDE)</code>

<code> SYNTHESIZED BEGIN</code>

<code> SYNTHESIZED END</code>


===L3P===
(<a href="http://www.hassings.dk/l3/l3p.html">http://www.hassings.dk/l3/l3p.html</a>)

<code> L3P IFPOV</code>

<code> L3P IFNOTPOV</code>

<code> L3P ELSEPOV</code>

<code> L3P ENDPOV</code>


===LDLite===
(<a href="http://ldlite.sourceforge.net/">http://ldlite.sourceforge.net/</a>)

<code> COLOR</code>

<code> COLOUR</code>

<code> TRANSLATE</code>

<code> ROTATE</code>

<code> SCALE</code>

<code> TRANSFORM</code>

<code> COLORNAME</code>

<code> COLOURNAME</code>

<code> POINT</code>

<code> MATRIX</code>

<code> CMDLINE &lt;line&gt;</code>

[[Category:Article]]